What does 'Invalid Drive Capacity' mean on my Western Digital Sentinel DX4200?
If your Western Digital Network Storage Server displays 'Invalid Drive Capacity', it indicates that the new drive capacity is either greater or smaller than the drive you replaced. Replace the inserted drive with a drive that has the correct drive capacity.
What does 'Reboot Required' mean on my Western Digital Sentinel DX4200 Network Storage Server?
If your Western Digital Network Storage Server displays 'Reboot Required', safely reboot the system.
What does 'WD Software Update Failed' mean on my Western Digital Network Storage Server?
If your Western Digital Network Storage Server displays 'WD Software Update Failed', repeat the software update process again.
What does 'BIOS Updated Reboot Required' mean on my Western Digital Sentinel DX4200?
If your Western Digital Network Storage Server displays 'BIOS Updated Reboot Required', it means the primary BIOS has been updated. Reboot the system to allow the updated BIOS to take effect.
What does 'BIOS Updating' mean on my Western Digital Sentinel DX4200?
If your Western Digital Network Storage Server displays 'BIOS Updating', your system BIOS is currently updating. Do not disconnect the power or interrupt the process until the update is complete.
What does 'BIOS Repaired Reboot Required' mean on my Western Digital Sentinel DX4200?
If your Western Digital Network Storage Server displays 'BIOS Repaired Reboot Required', your system is currently running on the secondary BIOS. An attempt will be made during the reboot to run the system on the primary BIOS.
General| Model | Sentinel DX4200 |
|---|---|
| Category | Network Storage Server |
| Drive Bays | 4 |
| Hard Drive Interface | SATA |
| RAID Support | RAID 0, 1, 5, 10 |
| Network Interface | Dual Gigabit Ethernet |
| Operating System | Windows Storage Server 2012 R2 Essentials |
| Form Factor | Tower |
| RAM | 4 GB |
| Storage Capacity | 12 TB |
| Drive Compatibility | 3.5" SATA |
To Next Page
