3
1200 PLASTER MIXER SAFETY INSTRUCTIONS
Return to Table of Contents
The following safety instructions are for the benet of the contractor and the equipment operators� These
instructions should be followed at all times and the contractor should make sure the operators are fully trained
and have read these safety instructions�
Do not operate or service this equipment before reading the operating and maintenance instruction 1�
manual or serious injury may result�
Stop the engine if leaving the machine unattended�2�
If the machine jams, disengage the clutch immediately� Turn engine o before attempting to dislodge 3�
the jammed object�
Keep the equipment properly maintained� Poorly maintained equipment can be unsafe�4�
Stop engine and allow engine to cool down before attempting to service the engine or add fuel�5�
Keep hands and objects out of the mixing barrel when the engine is running whether or not it is in 6�
gear�
Do not operate this equipment unless all guards and safety grates are attached and in place�7�
Never attempt any repairs while the engine is running�8�
Chock wheels if parked on a slope�9�
1200 PLASTER MIXER SAFETY INSTRUCTIONS
To Next Page
Loading...