9/20/13 PG-1
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank You for choosing Westin products
For Additional installation assistance please call
Customer service (800) 793-7846
www.westinautomotive.com
P.N.: 75-3035-Rev A ECO #: W13-0076
APP PART # 46-20055
FLIP-UP WINCH TRAY LICENSE RELOCATOR
ITEM QUANTITY DESCRIPTION TOOLS NEEDED
1 1 TRAY SIDE MOUNTING BRACKET 10MM WRENCH
2 1 LICENSE SIDE MOUNTING BRACKET 8MM WRENCH
3 2 NYLON SPACER 16MM WRENCH
4 2 M6 BUTTON HEAD BOLT (STAINLESS) ALLEN KEY (INCLUDED)
5 2 M6 NYLOCK NUT (STAINLESS) PHILLIPS SCREWDRIVER
6 4 M6 FLAT WASHER (STAINLESS)
7 2 M5 PHIL PAN SCREW (STAINLESS)
8 2 M5 HEX NUT (STAINLESS)
9 2 M5 LOCK WASHER (STAINLESS)
10 4 M5 FLAT WASHER (STAINLESS)
INSTRUCTIONS—INSTRUCCIONES—CONSIGNES
AUTOMOTIVE PRODUCTS, INC.
1. Remove contents from box, verify if all parts listed are present and free from damage. Carefully read and understand all instruc-
tions before attempting installation. Anti-seize lubricant must be used on all stainless steel fasteners to prevent thread galling.
2. Remove the fasteners attaching the fairlead to the winch tray.
3. Slip the Tray Side Mounting Bracket between fairlead and the winch tray. Re-attach the fairlead using the fairlead manufactur-
er’s hardware. Adjust the fairlead and Tray Side Mounting Bracket as necessary then torque the fairlead hardware per the fair-
lead manufacturer’s instructions.
To Next Page
Need help?
General
