18
CLEANING
RE-ASSEMBLING THE DOOR GLASS PANELS
• Insert the smaller clear glass panel (when fitted) first from
above and at an angle to the profile of the door.
• Repeat for the black bordered glass panel ensuring
the painted surface is facing to the downside.
RE-ASSEMBLING THE TOP DOOR TRIM
• Take hold of the top door trim at each side and position
it to the inside edge of the glass.
• Push the trim down with its top edge over glass panel until
the clip snaps in on each side of the trim.
• Push the middle of the trim down to ensure it is straight
and firm against the glass panel.
To Next Page
Loading...
