Need help?Do you have a question about the Westinghouse Graham and is the answer not in the manual?
General| Brand | Westinghouse |
|---|---|
| Model | Graham |
| Category | Fan |
| Language | English |
Crucial safety advice before installation and operation.
Lists necessary tools for fan assembly and installation.
Shows the downrod installation method for standard ceilings.
Check contents and turn off power to prevent electrical shock.
Use a metal outlet box rated for fan support (min 35 lbs).
Loosen canopy screws to remove the mounting bracket.
Securely install the mounting bracket to the ceiling outlet box.
Instructions for using the fan's included downrod.
Instructions for using a longer downrod than provided.
Steps to connect the downrod, yoke, and pins securely.
Remove the downrod ball from the downrod by unscrewing.
Reinstall the downrod ball and secure it to the extended downrod.
Securely hang the fan assembly onto the mounting bracket.
Understand remote control code combinations for interference prevention.
Diagram for connecting house wiring to the fan's remote receiver.
Proper placement of the wired remote receiver after connections are made.
Correctly align and secure the canopy to the mounting bracket screws.
Mount and lock the canopy cover ring onto the bracket screws.
Insert blades into flywheel and tighten to the bracket.
Ensure blade holder screws are tightened securely to the motor.
Align and attach the converting plate to the support plate screws.
Connect white wires together and blue/black wires for the light kit.
Align light kit keyhole slots and rotate to secure with screws.
Secure the light kit cage to the light kit plate using screws.
Install the transmitter holder onto the wall using provided screws.
How to use the remote to control fan speeds (OFF to HIGH).
Using the remote to control the light, including dimming.
How to turn on, check, and control fan direction and speed.
Cleaning instructions and checking connections for fan longevity.
Solutions for a fan that does not operate, checking power and wiring.
Steps to resolve noisy fan operation, including screw checks.
Procedures to minimize wobble by tightening screws or swapping blades.
Steps to troubleshoot a light fixture that fails to illuminate.
Explains the warranty period and what is covered for defects.
Visual guide and list of all fan parts and their corresponding numbers.
To Next Page