Need help?Do you have a question about the Westinghouse GFP Series and is the answer not in the manual?
Read and follow all safety instructions before installation and use to prevent injury.
Inspect fan contents and turn off power at the fuse box before installation.
Use a metal outlet box suitable for fan support, securely fastened to the ceiling.
Loosen canopy screws to detach the mounting bracket for installation.
Check fuses, wiring, and forward/reverse switch if the fan does not start.
Ensure housing and blade holder screws are snug; allow a break-in period.
Check blade/holder screws, canopy tightness, and consider swapping adjacent blades.
Verify switch housing connections and check light bulbs; contact electrician if needed.
Fan limits light fixture wattage to 190W; understand reset procedures for dimming/shutoff.
General| Model | GFP Series |
|---|---|
| Type | Ceiling Fan |
| Blade Material | Wood |
| Number of Blades | 5 |
| Motor Type | AC |
| Control | Pull Chain |
| Blade Span | 52 inches |
| Motor Speed | 3-speed |
| Reversible Motor | Yes |
| Light Kit | Available on some models |
| Mounting | Downrod or Flush Mount (Varies by model) |
| Finish | Varies by model (e.g., Brushed Nickel, Oil Rubbed Bronze, White) |
| Warranty | Limited Lifetime (on motor) |
To Next Page