How to fix a wobbly Westinghouse Vintage?
If your Westinghouse Fan is wobbling, you can try the following: * Ensure all blades are screwed firmly into blade holders. * Check that all blade holders are tightened securely to the motor. * Make sure the canopy and mounting bracket are tightened securely to the ceiling joist. * If the wobble persists, try interchanging two adjacent blades to redistribute the weight.
What to do if the light on my Westinghouse Fan does not work?
If the light on your Westinghouse Fan is not working, you can try the following: * Check to see that the wire connections in the switch housing are connected. * Check for faulty light bulbs. * If the light kit still does not operate, it is recommended to contact a qualified electrician for assistance.
Why is my Westinghouse Vintage Fan so noisy?
If your Westinghouse Fan is making unusual noises, try the following: * Ensure all screws in the motor housing are snug but not over tightened. * Check that the screws attaching the fan blade holder to the motor are tight. * Avoid using Solid State variable speed controls, as some fan motors are sensitive to their signals. * Allow a 24-hour "break-in" period, as most noises from a new fan will disappear after this time.
What to do if my Westinghouse Fan does not start?
If your Westinghouse Fan is not starting, here are a few things you can check: * Check the main and branch circuit fuses or circuit breakers. * Inspect the wire connections as outlined in step #15 or #16 of the installation instructions. * Ensure the forward/reverse switch is firmly in the up or down position, as the fan will not operate when the switch is in the middle. * If the fan still won't start, it is recommended to contact a qualified electrician.
General| Type | Ceiling Fan |
|---|---|
| Number of Blades | 5 |
| Motor Type | AC |
| Control Type | Pull Chain |
| Style | Vintage |
| Brand | Westinghouse |
| Blade Span | 52 inches |
| Warranty | Lifetime |
Explains how to install the fan for low ceilings.
Explains installation for normal ceilings.
Explains installation for vaulted ceilings, may need longer downrod.
Features two high-quality finishes on one blade for decor flexibility.
Allows choosing between 4 or 5 blades based on motor hole patterns.
Instructions for the flush mount installation.
Instructions for standard downrod installation.
Instructions for installation with a longer downrod.
Wiring instructions for fan controlled by a pull chain.
Wiring instructions for fan controlled by a wall switch.
How to operate the fan using pull chain and slide switch for speed and direction.
Instructions for cleaning and checking fan connections for longevity.
Steps to take if the fan fails to power on or operate.
Troubleshooting steps for unusual fan motor or blade noises.
Procedures to correct fan blade wobbling for smoother operation.
Steps to diagnose and fix issues with the light fixture.
To Next Page