What to do if my Westinghouse WSF6602XA Dishwasher is unable to discharge water?
If your Westinghouse Dishwasher isn't discharging water, it might be due to clogged water discharge hose and filters. To resolve this, first, cancel the current program. If the issue persists, it is recommended to contact for service.
How to fix insufficient water in my Westinghouse WSF6602XA?
If your Westinghouse Dishwasher isn't getting enough water, ensure the water inlet tap is fully open and water is flowing freely. Also, try separating the inlet hose from the tap and cleaning the hose's filter. If the problem continues after these steps, contact for service.
What to do if my Westinghouse Dishwasher is overflowing?
If your Westinghouse Dishwasher is experiencing an overflow, immediately unplug the machine and close the water tap. After doing this, it is recommended to contact for service.
Important safety information covering children, general use, and installation.
Safety precautions for electrical and water hookups.
How to select programs, delay start, change programs, and use half load.
Solutions for issues like start failures, water problems, noises, and washing results.
Guidelines for positioning, water hookup safety, and hose checks.
Instructions for drain hose connection and electrical safety.
Guidance on detergent selection, amount, and filling the dispenser.
Filling the rinse aid compartment and setting the correct level.
General guidelines for optimal loading of upper and lower baskets.
Identifies error codes and provides steps to resolve issues like water supply, drainage, and faults.
General| Type | Freestanding |
|---|---|
| Capacity | 15 place settings |
| Energy Rating | 3.5 Stars |
| Water Rating | 5 Stars |
| Energy Star Qualified | Yes |
| Control Type | Electronic |
| Color | Stainless Steel |
| Delay Start | Yes |
| Child Lock | Yes |
| Half Load Option | Yes |
| Water Consumption | 11.5L |
| Dimensions | 845 x 598 x 600 mm |
To Next Page