7. Product Filling / Refilling
3. S MA R T R E FI LLI N G
Open the door
Press button 2 on main control board located above the coin
mech access door - display will show "select drum to refill"
Close the door again - press selection button of the drum to
refill. Vending machine will identify the empty compartment
- or the one containing expired product. This compartment
will move to the sales position and the delivery door will
open to allow product to be inserted. Number of
compartments needed to refill and price set appears on the
display.
After loading the new product - press the blue shopper
button to record the product in the compartment and set
expiry time (after this time sale of this product will be
inhibited). If no product is inserted, press the selection
button to pass to next compartment. Continue until all
compartments are filled. The vending machine will pass back
to normal filling after analysing the drums.
When you refill a Fifo selection - every compartment must
be reloaded in successive order without leaving gaps. If you
do not have enough products to fill a Fifo - press the blue
shopper button after loading the last product and then
abandon refilling. Select the next drum to refill.
Command 51
The product filling date is sorted in this mode. The machine is
therefore able to recognise an expired product. To operate this
correctly - the date/time/no. of days to expiry MUST be entered
(command 71-78).
1.
2.
3.
4.
5.
To Next Page
