Power to the machine must be switched OFF.
The stop block can be adjusted - by removing a screw from
the underside of the drum tray.
There are different positions for the different drum
configurations as shown below:
Ensure in programming Command 71-78 you have set
drum configurations.
Perform a reload procedure of all drums converted.
To change the delivery door opening:
After changing the dimensions of the compartments - the
delivery door opening must be modified.
1.
2.
3.
4.
5.
10. Adjustments
4. A DJ US T I N G O PE N I N G OF T H E DE LI V E R Y DO O R S
4/6
8
12
16
24
48
To Next Page
