19. Command Codes EXPLANED
C O M M A N D S T O S E T R E F R I G E R A T I O N P A R A M E T E R S
Command 41: Sets cabinet temperature
Sets the lower internal cabinet temperature. The preset value is
+3°C. This value can be varied between +2 and +25°C.
Command 43: End defrosting temperature setting
This command allows the evaporator temp to be set, so after it
has defrosted, it will restart operating. This ensures complete
deforsting of the evaporator itself. The command is preset to
+5°C.
Command 44: Sets defrost cycle frequency
This command sets the interval between defrost cycles -
expressed in hours. Value can be varied from 1h and 8h - preset
at 3h.
Command 45: Setting the cut-out duration for the
refrigeration safety device
This command sets the amount of time that the refrigeration
safety device is to remain disabled. This period of time prevents
the vending machine from shutting down following an operation
that involves having the door open. The delay allows the
machine to return to normal operating temp. The preset value is
60 mins - but can be varied from 30 - 360 mins.
Command 46: Setting the safety temperature
Setting the temperature the safety device trips at - the temp
To Next Page
Loading...
