Need help?Do you have a question about the Weston PRO 2100 65-0101 and is the answer not in the manual?
General| Brand | Weston |
|---|---|
| Model | PRO 2100 65-0101 |
| Category | Food Saver |
| Language | English |
Use a grounded outlet, avoid liquids, damaged cords, and adapters for safe operation.
Keep clear of hot parts, use on a stable surface, and do not leave the unit unattended.
Use only specified parts/bags, avoid outdoor use, and do not disassemble the unit.
Do not remove the factory-installed seal bar tape protecting the heating element.
Emphasizes unplugging the unit from the power source before commencing any cleaning.
Unit automatically shuts down if it overheats; allow 20 minutes to cool.
Use a grounded outlet, avoid adapters, and ensure the plug fits securely.
The unit automatically shuts off if it overheats.
Caution is advised to avoid touching the heat-seal bar due to potential burns.
Ensure unit is OFF, unplugged, and handle hot parts carefully.
Start unit, open lid, fill bag, close lid, press START or Manual Seal.
Close lid, press START/Manual Seal; unit seals, cools, and releases.
Ensure unit is OFF and unplugged before performing any service.
Detailed steps for removing old tape and applying new tape.
Steps for checking and replacing the fuse if the unit does not operate.
Emphasizes COOK, SEPARATE, CLEAN, and CHILL for safe food handling.
To Next Page
