PAIRING THE CABLE TO YOUR DEVICE
How to pair the cable to your device:
1. Hold down the power button for 5 seconds.
The indicator light located next to the power
button will begin ashing red and blue to
indicate the pairing process has begun. The
voice prompt will indiciate “Pairing”.
2. To complete pairing the cable with your
device follow these steps:
• iPhone: Go to Settings/General/
Bluetooth/On*
• Android: Go to Settings/Bluetooth/On/
Scan for devices*
• Windows: Go to Settings/Bluetooth/On*
*Pairing procedure can vary per device.
3. Select “Westone BT 2.0”
4. If your device asks for a passcode, enter four
zeros (0000) for the passcode or accept the
connection.
5. Once the device is successfully paired the
indicator light will ash blue and the voice
prompt will announce “connected”.
Power Button
Indicator Light
To Next Page
Loading...