(3)
To charge the cable using the charging dock
follow these steps:
1. Open the charging dock cover (2) by sliding
the lock release to the right.
2. Place the battery
module into the
charging dock
with the logo
face up.
3. Close the
charging dock
cover to begin
charging the
cable. (3)
NOTE:
The cable can
be charged with or
without the USB
cable plugged in.
(2)
Your cable arrives partially charged so it can be
used immediately. In advance of charging your
cable, you will need to charge the charging dock.
To charge the charging dock follow these steps:
1. To charge the dock, plug the provided USB
cable into a USB port on any device.
2. Plug the mini USB end
of the cable into the
charging port located
on the bottom of the
charging dock. (1a)
CHARGING YOUR CABLE WITH THE PORTABLE CHARGING DOCK
(1)
(1a)
To Next Page
Loading...