To Next PageTo Next Page
Need help?Do you have a question about the Westward 4RYL2 and is the answer not in the manual?
Identifies all numbered parts and their functions on the torque wrench.
Details model numbers, square drive sizes, and maximum operation ranges for each model.
Covers accuracy ratings, communication availability, operation modes, and unit selection options.
Explains accuracy definition, battery type, test conditions, and environmental/EMC compliance.
Instructions for inserting AA batteries and securing the battery compartment cover.
How to wake the wrench from sleep mode and when the sleep function is disabled.
Procedure for resetting the wrench, including normal and troubleshooting resets.
Explains the display and shutdown behavior during low battery status.
Guides through sequential selection of measurement units (N-m, in-lb, ft-lb, kg-cm).
Instructions on setting the desired torque value using increase/decrease buttons.
Details how to operate the wrench in track mode, including target torque indication.
Explains how to use the peak hold mode to capture maximum torque values.
Clarifies communication for calibration and indicator behavior for target torque.
Highlights the necessity of annual recalibration for maintaining accuracy.
Warns against over-torquing, dropping, using as hammer, and exposure to elements.
Guidelines for battery removal, handling, mixing, and disposal.
Details the limited one-year warranty for defects and exclusions for consequential damages.
Identifies all numbered parts and their functions on the torque wrench.
Details model numbers, square drive sizes, and maximum operation ranges for each model.
Covers accuracy ratings, communication availability, operation modes, and unit selection options.
Explains accuracy definition, battery type, test conditions, and environmental/EMC compliance.
Instructions for inserting AA batteries and securing the battery compartment cover.
How to wake the wrench from sleep mode and when the sleep function is disabled.
Procedure for resetting the wrench, including normal and troubleshooting resets.
Explains the display and shutdown behavior during low battery status.
Guides through sequential selection of measurement units (N-m, in-lb, ft-lb, kg-cm).
Instructions on setting the desired torque value using increase/decrease buttons.
Details how to operate the wrench in track mode, including target torque indication.
Explains how to use the peak hold mode to capture maximum torque values.
Clarifies communication for calibration and indicator behavior for target torque.
Highlights the necessity of annual recalibration for maintaining accuracy.
Warns against over-torquing, dropping, using as hammer, and exposure to elements.
Guidelines for battery removal, handling, mixing, and disposal.
Details the limited one-year warranty for defects and exclusions for consequential damages.
General| Required Air Pressure | 90 psi |
|---|---|
| Average Air Consumption | 4 cfm |
| Tool Type | Air Drill |
| Model | 4RYL2 |
| Type | Reversible |
| Chuck Size | 3/8" |
| Free Speed | 1800 rpm |
| Air Inlet Size | 1/4 in NPT |
| Weight | 2.2 lb |
| Overall Length | 8-1/2" |
| Length | 8.5 inches |
