Wetelecom WM-D200 - Changing the PIN Code

26
ENG
5.4. CHANGE PIN CODE
• Click to display the Setting interface.
• Select “RUIM Card” Tab.
• Select “Change” in “PIN Mode”.
• Enter pin code for Old PIN Code, New PIN Code and Verify
New PIN Code, and then Click .
Note:
Entering the wrong PIN codes for 3 times, the RUIM card
will be locked and cannot use it until you have entered
the correct PUK code. The MTS Connect prompts you
each remaining number of attempts for entering the PIN
code or the PUK code.
5.5. SELECTING ALWAYS ON TOP MODE
• Click to display the Setting interface.
• Select “User” Tab.
• Select “ON” or “OFF” in “Always On Top”, and then Click
.
5.6. SELECTING A PREF MODE
• Click to display the Setting interface.
• Select “User” Tab.
• Select “Evdo+1x” or “Evdo only” or “1x only” in “Pref
Mode”, and then Click .