Whale Mk II SH2212B User Manual

Thank you for purchasing this Whale® product.
For over 40 years Whale® has led the way in the design and manufacturer of freshwater and waste systems
including:- plumbing, faucets, showers and pumps for low voltage applications. The company and its products have
built a reputation for quality, reliability and innovation backed up by excellent customer service.
For information on our full product range visit: www.whalepumps.com
CONTENTS
1. Principles of Operation
2. Specification
3. Application
4. Warnings
5. Parts List
6. Instructions for Installation
7. Instructions for Use
8. Maintenance
9. Trouble Shooting
10. Winterising
11. Service Support Details
12. EU Declaration of Conformity
13. Patents and Trademarks
14. Warranty
15. Appendix A - Identifying Flue Type
LIST OF IMAGES
Fig. 1 Components drawing
Fig. 2 Installation in vehicle
Fig. 3 Installation under vehicle
Fig. 4 Dimensions – top view inside vehicle
Fig. 5 Dimensions – side view inside vehicle
Fig. 6 Dimensions – front view inside vehicle
Fig. 7 Dimensions – top view outside vehicle
Fig. 8 Dimensions – side view outside vehicle
Fig. 9 Dimensions – front view outside vehicle
Fig. 10 Flue locating diagram
Fig. 11 Attaching flues
Fig. 12 Heater locating
Fig. 13 Installation and securing of heater
Fig. 14 Floor construction and cut out
Fig. 15 Attaching under floor heater
Fig. 16 Attaching flues
Fig. 17 Secure flue brackets
Fig. 18 Connect to gas supply
Fig. 19 Connect gas supply to under floor heater
Fig. 20 Hot air duct
Fig. 21 Hot air duct to under floor heater
Fig. 22 Tee fitting orientation
Fig. 23 Cold air duct
Fig. 24 Cold air duct to under floor heater
Fig. 25 Insert control panel
Fig. 26 Secure control panel
Fig. 27 Installed control panel
Gas and Electric Space Heater Mk II
SH2202 / SH2212B
1
INSTALLATION & USER INSTRUCTIONS

Whale Mk II SH2212B Specifications

General

Brand	Whale
Model	Mk II SH2212B
Category	Heater
Language	English

Summary

Principles of Operation

Specification

Application

Warnings

General Safety Precautions

Lists essential safety measures for gas leaks and operational restrictions.

Parts List

Instructions for Installation

Step 1 Find suitable location

Advises on selecting an optimal and safe location for heater installation.

Step 2 Cut out holes

Details how to cut required holes in the floor for flues.

Step 3 Attach heater to the floor

Explains the process of securing the heater to the vehicle floor.

Step 4 Underfloor heater location

Provides guidance on positioning the heater when installed beneath the vehicle floor.

Step 5 Securing the flues

Describes how to properly secure the combustion air and exhaust flues.

Step 6 Mounting the flues

Gives instructions for routing and mounting the heater's flues.

Step 7 Connect to gas supply

Outlines the procedure for connecting the appliance to the gas supply.

Step 8 Fitting Hot Air Ducts

Explains how to connect the hot air ducting to the heater.

Step 9 Fitting Cold Air Supply

Details how to ensure adequate cold air supply to the heater.

Step 10 Mounting of Whale® Control Panel

Guides on selecting and mounting the control panel for the heater.

Step 11 Electrical Connections 12V

Covers the low-voltage electrical connections for the heater and control panel.

Step 12 Electrical Connection 230V

Explains the high-voltage mains electrical connection requirements.

Completed installation

Final checks and confirmation of a properly installed heater.

DIMENSIONS

In vehicle installation

Details the dimensions and mounting for inside vehicle installations.

Instructions for Use

Operating Instructions

Explains how to use the heater's fan, gas, and electric modes.

Maintenance

Trouble Shooting

Winterising

Service Support Details

EU Declaration of Conformity

Patents and Trademarks

Warranty

Appendix - Identifying Flue and Installation Type

C13 Flue Type - for Vehicle in Motion

Describes the C13 flue type used for vehicles in motion.

C53 Flue Type - Standard installation

Describes the C53 flue type for standard installations.