Whale Mk II SH2202 User Manual

Thank you for purchasing this Whale® product.
For over 40 years Whale® has led the way in the design and manufacturer of freshwater and waste systems
including:- plumbing, faucets, showers and pumps for low voltage applications. The company and its products have
built a reputation for quality, reliability and innovation backed up by excellent customer service.
For information on our full product range visit: www.whalepumps.com
CONTENTS
1. Principles of Operation
2. Specification
3. Application
4. Warnings
5. Parts List
6. Instructions for Installation
7. Instructions for Use
8. Maintenance
9. Trouble Shooting
10. Winterising
11. Service Support Details
12. EU Declaration of Conformity
13. Patents and Trademarks
14. Warranty
15. Appendix A - Identifying Flue Type
LIST OF IMAGES
Fig. 1 Components drawing
Fig. 2 Installation in vehicle
Fig. 3 Installation under vehicle
Fig. 4 Dimensions – top view inside vehicle
Fig. 5 Dimensions – side view inside vehicle
Fig. 6 Dimensions – front view inside vehicle
Fig. 7 Dimensions – top view outside vehicle
Fig. 8 Dimensions – side view outside vehicle
Fig. 9 Dimensions – front view outside vehicle
Fig. 10 Flue locating diagram
Fig. 11 Attaching flues
Fig. 12 Heater locating
Fig. 13 Installation and securing of heater
Fig. 14 Floor construction and cut out
Fig. 15 Attaching under floor heater
Fig. 16 Attaching flues
Fig. 17 Secure flue brackets
Fig. 18 Connect to gas supply
Fig. 19 Connect gas supply to under floor heater
Fig. 20 Hot air duct
Fig. 21 Hot air duct to under floor heater
Fig. 22 Tee fitting orientation
Fig. 23 Cold air duct
Fig. 24 Cold air duct to under floor heater
Fig. 25 Insert control panel
Fig. 26 Secure control panel
Fig. 27 Installed control panel
Gas and Electric Space Heater Mk II
SH2202 / SH2212B
1
INSTALLATION & USER INSTRUCTIONS

Whale Mk II SH2202 Specifications

General

Brand	Whale
Model	Mk II SH2202
Category	Heater
Language	English

Summary

Principles and Specification

Principles of Operation

Technical Specifications

Application and Safety Warnings

Critical Safety Warnings

Highlights essential safety precautions regarding gas leaks and operational limitations.

Installation Procedures

Selecting Installation Location

Offers guidance on choosing the most suitable position for the heater within the vehicle.

Cutting Floor Openings for Flues

Details the procedure for creating necessary openings in the vehicle floor for exhaust and air inlet flues.

Heater Mounting and Floor Preparation

Covers securing the heater to the floor and specific preparation for underfloor mounting.

Flue Securing and Routing

Instructions on how to properly secure and route the combustion air inlet and exhaust flues.

Gas Supply Connection

Step-by-step guide for safely connecting the heater to the gas supply system.

Hot Air Duct Installation

Guides on connecting the hot air ducting to the heater's designated outlet.

Cold Air Supply Duct Installation

Guidance on connecting the cold air supply ducting to the heater's intake.

Control Panel Mounting

12V DC Electrical Connections

Space Heater Terminal Connections

Control Panel Terminal Connections

230V AC Mains Connection

User Operation Guide

Heater Operating Modes

Temperature Control and Frost Protection

Maintenance and Fault Diagnosis

Routine Maintenance

Fault Finding and Lockout Clearing

Guidance on diagnosing faults via flash codes and clearing gas/electric lockouts.