To Next PageTo Next Page
Need help?Do you have a question about the Wharfedale Pro Diamond SW 250 and is the answer not in the manual?
General| Type | Active subwoofer |
|---|---|
| Frequency Response | 35Hz - 150Hz |
| Power Handling | 250W |
| Input Connectors | XLR |
| Output Connectors | XLR |
System off, speaker cables shorted, or wrong source selected.
Addresses issues like lack of bass, indistinct bass, or distortion at various volumes.
Troubleshooting for SW 250 not responding: weak batteries, distance, or line-of-sight.
Addresses popping, thumping, indistinct sound, poor localisation, and picture distortion.
Handle grilles with care; clean cabinets with a damp cloth or furniture polish.
Details on returning units, exclusions, transit liability, and authorised service centres.
Statement of compliance with relevant EU directives and US/Canada standards.
Site subwoofers to enhance bass response without cancellation.
Spaced subwoofers smooth bass response in Home Cinema setups.
Locate subwoofers near their partnering loudspeakers for stereo applications.
Diagram for connecting subwoofer to AV amplifier's subwoofer output.
Diagrams for connecting subwoofer via stereo line outputs (A and B).
Diagram for connecting subwoofer using speaker terminals.
Instructions for unpacking speakers and fitting plinths/spikes for specific models.
Explanation of bi-wireable crossover panels and terminal binding posts.
Detailed technical specifications for SW 150 and SW 250 models.
Guide to using the remote handset for installation and operation.
Explanation of controls: Volume, Low Pass Filters, Phase, and Presets.
Advice on setup, listening rooms, and subwoofer positioning for optimal bass.
Guidance on positioning front, centre, and surround loudspeakers for home cinema.
Diagrams illustrating typical Home Cinema room layouts.
Instructions for unpacking, fitting feet, and initial setup for the SW 250 model.
Diagram identifying rear panel connections for power, inputs, and outputs.
Guidance on power connection and connecting to AV processors or stereo amplifiers.
Identification and function of controls on the subwoofer's front panel.
Instructions for unpacking, initial setup, and power connection for the SW 150 model.
Diagram identifying rear panel connections for power, inputs, and outputs.
Guidance on connecting to AV processors or stereo line outputs.
Advice on setup, listening rooms, and speaker positioning for optimal bass.
Diagrams illustrating typical Home Cinema room layouts.
Placement advice for front and surround speakers in a home cinema setup.
Guidance on optimal subwoofer placement for Home Cinema.
How to set speaker sizes ('Large'/'Small') in AV processors for bass management.
Adjusting delay settings for rear and centre speakers based on listening position.
Information on the Low Frequency Effects channel and its interaction with bass management.
Connecting the subwoofer via pre-amplifier outputs to the main amplifier inputs.
Using high-level speaker connections when no line-level output is available.
Methods for connecting two subwoofers to the system for enhanced bass.
Instructions for standard and bi-wired connections of front loudspeakers.
Diagrams for connecting centre channel and surround loudspeakers.
Recommended positioning for front stereo loudspeakers for optimal sound.
Adjusting subwoofer controls like Phase, Low Pass Filter, and Auto Switch.
Guidance on home cinema settings, listening tests, and using an SPL meter.
Covers ventilation, power cords, accessories, lightning, fire, and modifications.
Important operating warnings about signal inputs, connections, volume, and TV proximity.
Detailed specifications for all Diamond 9 series bookshelf, floorstanding, and AV speakers.
