Wharfedale Pro EVP-X12P User Manual

Unpacking
All Wharfedale Pro products are fully
checked before leaving the factory.
After unpacking please inspect
cabinets for any physical damage.
Please retain the shipping carton if
possible and internal packing material
in case the unit needs to be returned. Please check as soon
as possible the unit is functioning. In the event of any damage
please contact your dealer immediately so that a written claim
for damages can be made.
Wharfedale Pro Limited Warranty*
Wharfedale Pro EVP-XPSeries loudspeaker systems are warranted
to be clear of manufacturing or materials defects for a period of
one year from the original date of purchase. In the event of
malfunction, contact your authorised Wharfedale Professional
dealer or distributor for information.
*Be aware that warranty details may differ from country to
country. Contact your dealer or distributor for information.
These terms do not infringe your statutory rights.
WHARFEDALE PRO EVP-XP SERIES
 WARNING & SAFETY INSTRUCTIONS
Wharfedale Pro EVP-XP Series of Professional Sound Reinforcement Loudspeakers
1. READ INSTRUCTIONS carefully before operating this product.
2
. RETAIN these instructions.
3. COMPLY WITH WARNINGS - All warnings and instructions for
this product should be adhered to.
4.  WATER & MOISTURE

- This Wharfedale Pro unit should
not be used near liquids. If should not have liquids placed on or in
close proximity as there are DANGEROUS VOLTAGES
present.
5.  VENTILATION/AIR FLOW: This Wharfedale Pro unit
should not have its heat sinks obstructed from air flow. It should
not be situated in a built-in installation that may hamper air flow to
the heat sinks. It should not be placed near heat sources.
6.  POWER SUPPLY: This Wharfedale Pro unit should be only
connected to a power supply as stated on the unit. Power supply
cables should be routed where they will not be walked on or
pinched by objects placed adjacent or upon them.
7.  ELECTRIC SHOCK: Care should be taken that the grounding
of this unit is NOT defeated. Do not use this units power cable
with an extension cable unless the pins can be fully inserted.
7. CABLES - Use quality screened cables for signal connections.
8.   RIGGING • SUSPENDING • MOUNTING
The rigging, suspension or mounting of this speaker system can
expose members of the public to serious health risks and even
death. UNDER NO CIRCUMSTANCES ATTEMPT TO RIG,
SUSPEND OR OTHERWISE MOUNT THIS SYSTEM UNLESS
YOU ARE FULLY QUALIFIED AND CERTIFIED TO DO SO BY
RELEVANT LOCAL, STATE AND NATIONAL AUTHORITIES.
ALL RELEVANT SAFETY REGULATIONS MUST BE
FOLLOWED. IF YOU ARE NOT PROPERLY QUALIFIED OR DO
NOT KNOW OF PERTINENT REGULATIONS, CONSULT
QUALIFIED PERSONNEL FOR ADVICE AND ASSISTANCE.
9.  CAUTION: These professional loudspeaker systems are
capable of generating very high sound pressure levels. Use care
with placement and operation to avoid exposure to excessive
levels that can cause permanent hearing damage.
10. SERVICING - The user should not attempt to service this
product except that mentioned in this manual.
EVP-XP POWERED SERIES
PROFESSIONAL LOUDSPEAKER
USER MANUAL.
THIS USER MANUAL COVERS THE FOLLOWING MODELS:
EVP-X12P • EVP-X12PM • EVP-X15P • EVP-X15PM •
EVP-X215P
EVP-X15PB • EVP-X18PB Subwoofers
Page 1
Contents:
Page 1: Warning and Safety Instructions
Page 2: Specifications/Operating and Use
Page 3. Product Features/ EVP-X12PM/15PM Panel
Page 4: EVP-X18PB Rear Panel Diagram
Page 5: EVP-X15PB and EVP-X18PB Operation
Page 6: Single EVP-X18PB with Stereo Mid/High Active System and Stereo Active Sub and Mid/High System
Page 7: Stereo Passive Mid/High Speaker with Active Sub System and EVP-X15P/18PB Block Diagram

Wharfedale Pro EVP-X12P Specifications

General

Type	Active
Configuration	2-way
Frequency Response	55Hz - 20kHz
System Impedance	8 Ohms
Max SPL	128dB
Low Frequency Transducer	12" Woofer
Crossover Frequency	2.5 kHz
Nominal Coverage	90° x 60°
Outputs	XLR
Input Connectors	XLR
Tweeter Size	1"

Summary

Wharfedale Pro EVP-XP Series Safety and Handling

General Safety Instructions and Warnings

Essential safety precautions for operating Wharfedale Pro EVP-XP loudspeakers, covering electrical, environmental, and usage risks.

Product Unpacking and Inspection Procedures

Guidelines for unpacking, inspecting for damage, and retaining packaging for Wharfedale Pro products.

Wharfedale Pro Limited Warranty Information

Overview of the limited warranty period and terms for Wharfedale Pro loudspeaker systems.

Wharfedale Pro EVP-XP Series Specifications and Operation

Technical Specifications Overview

Detailed specifications for EVP-X12P, EVP-X12PM, EVP-X15P, EVP-X15PM, EVP-X215P, EVP-X15PB, and EVP-X18PB models.

Connecting and Operating Your EVP-XP System

Instructions for connecting audio sources, powering up, and operating the EVP-XP series speakers safely and effectively.

Wharfedale Pro EVP-XP Series Features and Panel Details

Key Product Features and Amplifier Specifications

Highlights of EVP-XP series features including amplifier power, protection, EQ, and subwoofer specific functions.

EVP-X12PM/15PM Control Panel Functions

Detailed explanation of the controls and connectors on the EVP-X12PM and EVP-15PM models.

Wharfedale Pro EVP-X18PB Rear Panel Guide

EVP-X18PB Rear Panel Connections and Controls

Identification and description of all inputs, outputs, volume, phase, and power controls on the EVP-X18PB rear panel.

Wharfedale Pro EVP-X15/18PB Operation Details

EVP-X15/18PB Input, Output, and Switch Functions

Explanation of input/output connectors, speaker level input, and the OUTPUT A&B and Phase switches.

EVP-X15/18PB Volume, Power, and AC Input

Guide to using the volume control, power switch, and connecting the AC power cable to the EVP-X15/18PB.

Wharfedale Pro EVP-XP System Setup Diagrams

Single EVP-X18PB with Stereo Mid/High System Setup

Diagram illustrating a system with one EVP-X18PB subwoofer and two EVP-X15P mid/high speakers.

Stereo Active Sub and Mid/High System Setup

Diagram showing a system configuration with two EVP-X18PB subwoofers and two EVP-X15P mid/high speakers.

Wharfedale Pro EVP-XP System Configuration and Block Diagrams

Passive Mid/High with Active Sub System Setup

Diagram for connecting passive mid/high speakers to an active subwoofer system.

EVP-X15P/18PB Signal Flow Block Diagram

Visual representation of the signal path, EQ, filtering, and amplification stages within the EVP-X15P/18PB.