PMX 710 CHANNELS 1-6
PMX 710 CHANNEL 7
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
1. Peak LED - Illuminates when the channel is clipping
2. High - High frequency shelving EQ, centered around 12kHz
3. Mid - Mid frequency shelving EQ, centered around 2kHz
4. Low - Low frequency shelving EQ, centered around
100Hz
5. Mon - Sends signal to a stage monitor
6. FX Send - Sends signal to the built-in FX processor
7. Pan - Places the signal within the stereo eld
8. Level - Controls the overall volume of the channel
9. Line in - Balanced / unbalanced ¼” TRS input for line level sources
1
0. Mic - Balanced XLR microphone input with switchable +48v phantom
powering (Global Phantom power switch on rear of PMX unit)
1
. Peak LED - Illuminates when the channel is clipping
2. High - High frequency shelving EQ, centered around 12kHz
3. Low - Low frequency shelving EQ, centered around 100Hz
4. Mon - Sends signal to a stage monitor
5. FX Send - Sends signal to the built-in FX processor
6. Balance - Spatially places the signal within the stereo eld
7. Level - Controls the overall volume of the channel
8. CD/T
ape In - Dual phono inputs for connection of consumer level
stereo sources
9. USB/Line Switch - Selects the input source for the channel
1
0. USB Input - For connecting a computer, the PMX710 acts as an audio
interface
9
10
10