Wharfedale Pro PMX 500 - Page 25

PMX
Powered Mixer
23
SPECIFICATIONS
PMX 710
250W x 2 RMS into 4Ω
+28dBu (mix out (balanced))
≤0.4%@40Hz-20kHz 100w/4Ω(speakers out)
≤0.02%@20Hz-30kHz +14dBu(mix/monitor out)
-50dB residual output noise(speakers out)
-83 dB residual output noise(mix/monitor out)
88dB input mic to speakers out
58dB input mic to mix/monitor out
48dB input mic to rec out
54dB input line to speakers out
58dB input tape&usb to speakers out
+/-
15 dB maximum
High 12kHz shelving
Mid 2kHz shelving
Low 100Hz shelving
7bands(60Hz, 120Hz, 480Hz ,1kHz, 4kHz, 8kHz ,16kHz)
Max: +/-
12 dB
4-Segment LED x2 (0dB output 0dBu on meter mix L/R)
Turns on approx +6 dBu {Comp ≥240W (speakers out) / each CH}
16 Effects(Hall1, Hall2, Room1, Room2, Room3,Plate Reverb1,
Plate Reverb2, Plate Reverb3,Chorus, Flange, Delay1, Delay2,
Chorus/Room1, Chorus/Room2,Vocal Cancel, Rotary Speaker)
AC100-120V~/220-240V, 50/60Hz
392 x 261 x 243mm
440 x 295 x 329mm
5.7 kg
6.9 kg
Model
Power
Output
Maximum output level
Total harmonic distortion:
Hum& noise
Maximum voltage gain
Input channel equalisation
Graphic equaliser
Level meter
Limit indicator
Digital effects
Power
Productdimension(HxWxD)
Cartondimension(HxWxD)
Net weight
Gross weight