Need help?Do you have a question about the Wharfedale Pro R-2004FX and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Microphone Inputs | 4 |
| Line Inputs | 4 |
| Phantom Power | Yes |
| Main Outputs | 2 |
| EQ per Channel | 3-Band |
| Effects | Built-in Effects |
| Type | Analog Mixer |
| Other Outputs | 1 |
Welcome and overview of the Wharfedale Pro R Series mixers.
Lists specific features of the R-1604FX mixer model.
Lists specific features of the R-2004FX mixer model.
Details shared functionalities and components across both mixer models.
Instructions for connecting and using the mixer's external power supply.
Advice on handling potential shipping damage and packaging.
Essential safety guidelines for operating and maintaining the mixer.
Summary of the limited warranty coverage for the R Series mixers.
Details on low impedance mic inputs, line inputs, and the low cut filter on mono channels.
Explanation of the three-band EQ for R-1604FX and R-2004FX, including sweepable mid.
Describes the PRE and POST fader auxiliary sends available on the R Series mixers.
Explains AUX/EFX controls, PRE/POST switch, and EFX section details.
Covers PAN control, SOLO, MUTE, PEAK/SIG LEDs, and Channel Fader functionality.
Details stereo input jacks, EQ, and AUX/EFX behavior for stereo sources.
Adjusts compensation for different line level sources (+4dBu or -10dBv).
Describes AUX/EFX controls and send/return jacks for external connections.
Level controls for EFX returns and selecting internal digital effects presets.
Engages and disengages the digital effects signal.
Explains the 10-segment LED bar-graph meters for signal level monitoring.
Details the power switch, power LED, phantom power switch, and its indicator LED.
Describes the Tape Out jacks for stereo recording devices.
Explains outputs for studio monitor speakers and headphone jack.
Covers Main Mix Faders, ALT 3-4 Fader, ALT 3-4 TO MIX, and 2TK LEVEL knob.
Jack for remote switching of the digital effects unit.
Describes insert jacks for serial effects processing or direct outputs on R-2004FX.
Details the balanced XLR main outputs and 1/4" TRS ALT 3-4 outputs.
Location of the AC power input connector and the main power switch.
Wiring details for balanced female XLR microphone inputs.
Wiring information for the balanced 1/4" Tip Ring Sleeve ALT 3-4 outputs.
Wiring for unbalanced 1/4" insert jacks and RCA tape I/O.
Wiring details for the 1/4" Tip Ring Sleeve headphone output jack.
Details maximum output levels and total harmonic distortion for the mixers.
Covers frequency response range and hum/noise performance.
Information on voltage gain, maximum levels, and crosstalk interference.
Details input channel EQ, indicators, and phantom power specifications.
Physical specifications including weight and dimensions for both mixer models.
Specifications for channel microphone, line, and stereo input connectors.
Specs for effect return, insert, and tape input connectors.
Specs for main, control room, and auxiliary/EFX send output connectors.
Specs for insert, RCA rec output, and headphone output connectors.
To Next Page
