Need help?Do you have a question about the Wharfedale Pro R200 and is the answer not in the manual?
General| Brand | Wharfedale Pro |
|---|---|
| Model | R200 |
| Category | Mixer |
| Language | English |
Lists essential features like inputs, EQ, sends, and outputs of the R200 mixer.
Includes instructions for power supply, packing, and warranty information.
Details the low impedance mic inputs and balanced/unbalanced mono line inputs.
Covers the Low Cut Filter, Gain Control, and three-band EQ section for signal shaping.
Explains auxiliary sends, EFX routing, and pan control for signal distribution.
Describes stereo inputs, mono operation, and input sensitivity selection.
Explains the EFX to AUX button functionality for routing EFX return to the AUX bus.
Covers the controls for EFX send level and EFX return level.
Describes the main mix LED section for level indication and overload warning.
Explains the Power ON LED and Phantom Power indicator LED status.
Details headphone output, control room outputs, and volume controls.
Describes the RCA phono jack inputs for connecting tape devices and routing options.
Details the balanced XLR and 1/4" (TRS) main outputs.
Explains the AC cable connector and the ON/OFF switch.
Illustrates the signal path for mono input channels from gain to output.
Shows the signal path for stereo inputs and the stereo EFX return.
Depicts the signal flow to the main mix, main outputs, and monitoring outputs.
Provides specifications for main mix noise and total harmonic distortion (THD).
Details the frequency response and crosstalk attenuation characteristics.
Lists maximum input/output levels and impedance values for various connections.
Specifies EQ frequency points, ranges, and the mixer's power consumption.
To Next Page
