Need help?Do you have a question about the Wharfedale Pro EZ-M and is the answer not in the manual?
General| Brand | Wharfedale Pro |
|---|---|
| Model | EZ-M |
| Category | Mixer |
| Language | English |
Details the key features of the Wharfedale Pro EZ-m 16x2 mixer.
Guidance on using the provided external power supply unit and ensuring airflow.
Information regarding protection during transit and handling shipping damage.
Precautions against heat, humidity, dust, vibration, and servicing.
Details the limited one-year warranty and claims process for defects.
Describes the low-noise, high-headroom MIC inputs for dynamic microphones.
Details the 1/4" TRS jacks for balanced/unbalanced line level sources.
Explains adjusting input preamp level using the GAIN control and CLIP LED.
Indicates when the input signal is too high, causing preamp distortion.
Details the two-band equalization with 15dB boost/cut at 12kHz (High) and 80Hz (Low).
Adjusts the left/right balance of the mono signal to MAIN MIX outputs.
Controls the level of the signal sent to the MAIN MIX master volume.
Adjusts left/right balance for stereo inputs or acts as PAN for mono inputs.
Controls the volume of both left and right stereo signals to the MAIN MIX.
Amber LED indicating the mixer is powered on.
4-segment LED bar-graph meters showing MAIN MIX output signal levels.
1/8" stereo and RCA jacks for introducing external stereo signals.
1/8" stereo and RCA jacks for routing MAIN MIX stereo signal out.
Balanced 1/4" output jacks for connection to amplifiers or recording devices.
1/4" and 1/8" amplified stereo headphone jacks with volume control.
Slide switch to turn the unit on and off; recommends powering down system components first.
Location for connecting the supplied power adapter.
Details wiring for MIC, LINE, MAIN MIX, 2TK, and PHONES connectors.
To Next Page
