Wharfedale Pro R200 - Technical Specifications; Noise and Distortion Levels; Frequency Response and Attenuation; Input;Output Levels and Impedances

Main Mix Noise
,,
20Hz-20kHz bandwidth, 1/4 Main out,channels Main Mix fader down, channel faders down: -100dBu
1-4 Trim@ unity gain, channel EQs flat,all channels Main Mix fader unity, channel faders down: -90dBu
assigned to Main Mix,channels 1 and 3 pan Main Mix fader @ unity, channel faders @ unity:
left, 2 and 4 pan right -90dBu
Total Harmonic Distortion (THD)
1KHZ @ +14dBu,20Hz-20kHz Mic in to Main out: 0.0025%
Attenuation(Crosstalk)
1kHz relative to 0dBu,20Hz-20kHz 1 Main fader down: -85dBu
,,
bandwidth,line in,1/4 +Main out,Trim @ unity Channel VR minimum : -70dBu
Frequency Response 20Hz20kHz: +0dB/-1dB
Mic input to any output 10Hz-60kHz: +3dB/-3dB
Maximum levels Mic in : +4dBu
Tape in: +13dBu
All other inputs: +25dBu
Main Mix XLR out: +22dBu
All other outputs: +22dBu
Impedances Mic in: 3 kilohms
Channel input: 20 kilohms
Stereo input: 20 kilohms
All other inputs: 10 kilohms or greater
Tape out: 10 kilohms
All other outputs:100 ohms
EQ High shelving: +/-15dB@ 12kHz
Mid peaking: +/-15dB@ 2.5kHz
Low shelving: +/-15dB@ 80Hz
Power Consumption 25 watts EUROPE:230VAC-50Hz
JAPAN:100VAC-60Hz
UK: 240VAC-50Hz
USA :120VAC-60Hz
SIZE mm (HxWxL) 80.3 x 307 x379
Weight 4.4 kg
SPECIFICATIONS - R200
R Series Mixers R200
.6.
-