Wheaton UniSpense PRO Series

Need help?

Do you have a question about the Wheaton UniSpense PRO Series and is the answer not in the manual?

Summary

Safety Symbols and Product Markings

General Safety Rules

Specific Safety Considerations

Highlights critical safety points like proper grounding for shock prevention.

Installation

Input Power Requirements

Initial Startup and Operation

Pump Head Attachment and Tubing Installation

Step-by-step guide for attaching the pump head and installing tubing.

Switching the Unit ON

Instructions on how to turn the unit on.

Keypad Functions and Icons

Explains the functions of the keypad buttons and icons.

Unit Setup

Preparing for Batch and Single Dose Dispensing

Pump Head Selection

Tubing Size

Making a Calibration

Setting Calibration Speed

Priming the Tubing

Instructions on how to prime the tubing to remove air.

Calibration Dispense

Performing a dispense for calibration measurement.

Making Batch and Single Dose Dispenses

Flow Rate

How to set the desired flow rate for dispensing.

Dispensing Parameters

Batch Count

Volume per Dispense

How to set the volume for each individual dispense.

Drawback Function

Advanced Dispensing Features

Making a Dispense

How to start a batch dispense operation.

Dispense Adjustments and Repetition

Adjust Volume During Batch Dispense

Constant Flow Rate Dispensing

Constant Flow Rate

How to set the constant flow rate.

Constant Flow Rate Operations

Soft Start; Ramping

Tips on Maintaining Maximum Accuracy

Proper Tubing Selection

Selection of Ramp Rates

Maintenance and Troubleshooting

Maintenance

Routine maintenance procedures for the unit.

Troubleshooting - For Qualified Maintenance Personnel Only!

Troubleshooting common issues for qualified personnel.

Fuse Replacement