Installation Manual: GM LT1_A1R13E
Last Updated: February 12th, 2019
Page 24 of 36
www.whipplesuperchargers.com
73. Remove the factory driver side headlight by removing the (4) factory fasteners using an 10mm socket.
74. Install the supplied intercooler electric water pump to the intercooler water reservoir using the supplied t-bolt
clamp to secure the pump to the reservoir bracket. Face the pump outlet towards the back.
75. Install the supplied 90deg ¾” ID hose to the reservoir outlet to the pump inlet. Secure with the supplied pinch
clamps.
To Next Page
Loading...
