Whirlpool 3XARG493WP02 - Declaration of Conformity

Declaration of conformity
9 This appliance is designed to store food and
is manufactured in conformity with EEC
directive No. 89/l 09.
l This appliance has been designed, built, and
marketed in compliance with:
- the safety targets of the Low Voltage EEC
Directive 73/23;
-the protection requirements of the “EMC”
EEC Directive 89/336 amended by EEC
Directive 93/68.
l This appliance is free of CFC’s (refrigerant
circuit contains R134a). For more details,
please refer to the rating plate on the
appliance.
Leveling
If necessary, it is possible to level the appliance
by turning the two leveling screws on the
refrigerator bottom, one on the right and the
other on the left, immediately behind the front
grille, as follows:
. remove the front grille;
l turn one screw or both, clockwise to raise the
appliance;
l turn one screw or both, anticlockwise to
lower the appliance;
. check if desired leveling has been reached;
l put the front grille back into place.
How to remove the front grille
To remove the grille:
l open the refrigerator door;
l grab the grille with both hands;
l press the upper part of the grille to release it
from the two side locks;
l rotate the grille towards you;
l pull it completely away.
To put the grille back into place:
l carry out the above operations in reverse
order.