Whirlpool 3XARG493WP02 - How to Operate the Refrigerator;Freezer

HOW TO OPERATE THE REFRIGERATOR/FREEZER
Removal of the sliding shelf’s rail
(Style 1)
l slightly raise both ends of the rail;
l pull the rail completely out from the front.
To reposition the rail:
l align the rail hooks with the corresponding
supports on the rack-track rail.
NOTE: Make sure that all the hooks are aligned
with the rail supports and that they are all on
the same level.
l keeping the rail pressed on the supports,
push it downwards;
l finally check that the rail is well fixed on the
corresponding supports.
To reposition the shelf on the rail:
l firmly hold the shelf with both hands;
l rarse the front side by approximately 45”;
l insert both sides of the shelf in the upper run
channel of the rail;
l lower the front side back to its level position.
Removal of the meat drawer and its lid
(Style 1)
To remove the meat drawer:
l slide the meat drawer out until it stops;
l raise the front side of the drawer;
l slide the drawer completely out;
To reposition it, carry out the above operations
in reverse order.
To remove the lid:
l raise the front side of the lid and then the
back side;
l pull outwards,
To reposition, carry out the above operations in
reverse order.