27
q
Check electrical requirements. Be sure you have correct elec-
trical supply and recommended grounding method.
q
Check that washer/dryer is plugged into a grounded outlet.
q
Check that all parts are now installed. If there is an extra part,
go back through steps to see what was skipped.
q
Check that washer/dryer is level.
q
Check that you have all of your tools.
q
Dispose of/recycle all packaging materials.
q
Remove any tape remaining on washer/dryer.
q
Check that transport bolts were completely removed from
back of washer/dryer.
q
Check that inlet hose is attached and water faucet is on.
q
Check for leaks around faucet, valve, and inlet hose.
q
Read “Using the All-In-One Washer/Dryer.”
q
To test and clean your washer/dryer, turn on the washer and
choose the Regular/Quick cycle and run it without clothes.
Use only HE detergent. Use 1/2 the manufacturer’s recom-
mended amount for a medium-size load.
Complete Installation Checklist
To Next Page
Loading...
