To Next PageTo Next PageWhat does F6E3 Communication lost with HMI mean on my Whirlpool Washer/Dryer?
If your Whirlpool Washer/Dryer displays error code F6E3, indicating a communication loss with the HMI, reboot the washer/dryer by touching and holding the ‘Home’ icon for 15-20 seconds. If the problem persists, try resetting the washer/dryer by unplugging it and plugging it back in. If unsuccessful, call for service.
What to do if my Whirlpool Washer/Dryer clothes are not drying satisfactorily?
If your clothes aren't drying well in your Whirlpool Washer/Dryer, the load might be too large. Separate the load so items can tumble freely. A drum that's half full or less will improve drying performance and reduce cycle time.
What causes unusual noise in my Whirlpool 7MWFC9822HC Washer/Dryer?
Unusual noise in your Whirlpool Washer/Dryer can be caused by several factors. A small object might be caught between the edges of the drum, so check for and remove any obstructions. The washer/dryer may also vibrate if it isn’t properly leveled; ensure all four feet are in firm contact with the floor. Clothing balled up inside can also cause vibration; separate the items and restart the machine.
What to do if my Whirlpool 7MWFC9822HC clothes are wrinkled after drying?
If your dried clothes are wrinkled when using your Whirlpool Washer/Dryer, remove garments promptly at the end of the drying cycle, or use the Wrinkle Shield option. Also, avoid tightly packing the washer/dryer; dry smaller loads that can tumble freely, as a drum that's half full or less will improve drying.
What does F7E2 Motor control over temperature mean on my Whirlpool 7MWFC9822HC?
If your Whirlpool Washer/Dryer displays error code F7E2, indicating a motor control over temperature or over current fault, reboot the washer/dryer by touching and holding the ‘Home’ icon for 15-20 seconds. If the problem persists, try resetting the washer/dryer by unplugging it and plugging it back in. If unsuccessful, call for service.
Why is my single-dose laundry packet not dissolving in my Whirlpool 7MWFC9822HC?
Be sure to add the laundry packet to the Whirlpool Washer/Dryer drum before adding clothes. Do not add the packet to the dispenser. Always follow the manufacturer’s instructions to avoid damage to your garments.
What does F3E5 Dry NTC failure mean on my Whirlpool Washer/Dryer?
If your Whirlpool Washer/Dryer displays error code F3E5, which indicates a Dry NTC failure, reboot the washer/dryer by touching and holding the ‘Home’ icon for 15-20 seconds. If the problem persists, try resetting the washer/dryer by unplugging it and plugging it back in. If unsuccessful, call for service. Note that while the wash function remains operable, the dry function will not work.
What does F4E1 Water heater relay failure mean on my Whirlpool Washer/Dryer?
If your Whirlpool Washer/Dryer displays error code F4E1, which indicates a water heater relay failure, reboot the washer/dryer by touching and holding the ‘Home’ icon for 15-20 seconds. If the problem persists, try resetting the washer/dryer by unplugging it and plugging it back in. If unsuccessful, call for service.
What does F8E1 No water flow detected mean on my Whirlpool 7MWFC9822HC?
The F8E1 error on your Whirlpool Washer/Dryer indicates no water flow or a fill timeout. Ensure the washer/dryer is connected to the home cold water supply and that the water supply valve is turned on. Check that the inlet hose is not kinked. If the problem persists, it may require professional service.
What to do if my Whirlpool 7MWFC9822HC load is too hot after drying?
If your Whirlpool Washer/Dryer load is too hot, allow the drying cycle to complete the cool-down portion before removing the load. Canceling the cycle prematurely will result in very hot clothes.
Lists appliance models, operating frequency, voltage, power, and capacity.
Provides height, width, and depth measurements of the appliance.
Details the maximum and minimum water pressure needed for operation.
Provides essential safety messages and symbols to prevent injury.
Highlights specific fire risks associated with dryer installation and use.
Crucial safety precautions for operating the washing machine.
Details the risk of hydrogen gas and necessary precautions.
Key safety guidelines specific to the dryer function.
Emphasizes the importance of using genuine and quality replacement parts.
Explains the function of buttons, LCD screen, and indicators.
Details the Load & Go bulk dispenser and the single-load dispenser.
Guides on choosing wash cycles based on load type and desired wash.
Explains basic and additional options for wash cycles.
Stresses the need for High Efficiency detergents and their benefits.
How to calculate and set detergent concentration levels for optimal cleaning.
Instructions for adding HE detergent to bulk and single-load dispensers.
Guidance on adding liquid fabric softener to the designated compartment.
Steps for the first wash cycle and preparing laundry.
How to properly load the machine for optimal washing and drying.
Instructions for using the bleach dispenser.
How to choose wash programs, temperature, and spin speed.
Explains Automatic Drying and Timed Drying options.
Details settings like Soil Level, Extra Rinse, FanFresh, and Wrinkle Shield.
Managing Load & Go settings, concentration, control lock, and mute.
Accessing utility cycles and customizing user preferences.
Importance of removing clothes promptly after cycles to prevent issues.
How to schedule a cycle to start at a later time.
Keeping the appliance area clean and basic care recommendations.
Step-by-step guide for cleaning the rubber door seal.
Using cycles with cleaning products for thorough interior cleaning.
Instructions for cleaning both single-load and bulk dispenser systems.
Detailed steps for removing and reattaching dispenser drawers.
How to clean the removable bulk detergent/softener containers.
Guidance on inspecting and replacing water inlet hoses.
Steps for preparing the appliance for periods of inactivity.
Protecting the appliance from freezing during storage.
Procedures for safely moving and recommissioning the appliance.
Step-by-step guide to safely drain residual water from the pump filter.
Instructions for removing, cleaning, and reinserting the drain pump filter.
Tips for cleaning the door seal with specialized wipes.
Addresses appliance stability and movement issues.
Explains common noises and their potential causes.
Steps to identify and resolve water leaks from the appliance.
Specific solutions for leaks originating from the door.
Troubleshooting for cycles not running or performing as expected.
Solutions for issues with the touch controls not working.
Steps to resolve power, water supply, or fill issues.
Addresses problems with the door locking or unlocking mechanism.
Solutions for drain hose problems like clogs or improper installation.
Reasons for clothes being wet and how to improve spinning.
Explains the function of spinning without water addition.
Addresses issues related to water temperature during wash cycles.
Solutions for loads not being rinsed and stains not being removed.
Tips to prevent clothes from becoming wrinkled or tangled.
Identifies causes and solutions for fabric damage during wash cycles.
Causes and preventive measures for odors within the washer/dryer.
Solutions for preventing whites from becoming dingy and colors from fading.
Troubleshooting for dispenser malfunctions and packet dissolving problems.
Explains why cycle times may vary or be longer than expected.
Steps to resolve issues preventing the drying cycle from starting.
Diagnosing and fixing abnormal noises from the appliance.
Addresses clothes not drying properly, lint, wrinkles, and load heat.
Solutions for error codes F0E1, F0E2, F0E5 (OB).
Troubleshooting for F1E1, F1E2, F3E1, F3E2, F3E5, F3E6, F4E1, F4E2, F4E4, F5E1 codes.
Solutions for F5E2, F5E3, F5E4, F6E1, F6E2, F6E3 error codes.
Troubleshooting for motor control, temperature, and heater errors (F7E2 to F8E1).
Solutions for overflow (F8E3) and drain timeout/pump failure (F9E1).
Troubleshooting for Wi-Fi errors (FCE1) and power loss recovery (PF).
Details the warranty period, what's covered, and exclusions.
How to submit a warranty claim and required documentation.
Conditions that can render the warranty invalid.
Contact information for customer support centers across various countries.
Lists appliance models, operating frequency, voltage, power, and capacity.
Provides height, width, and depth measurements of the appliance.
Details the maximum and minimum water pressure needed for operation.
Provides essential safety messages and symbols to prevent injury.
Highlights specific fire risks associated with dryer installation and use.
Crucial safety precautions for operating the washing machine.
Details the risk of hydrogen gas and necessary precautions.
Key safety guidelines specific to the dryer function.
Emphasizes the importance of using genuine and quality replacement parts.
Explains the function of buttons, LCD screen, and indicators.
Details the Load & Go bulk dispenser and the single-load dispenser.
Guides on choosing wash cycles based on load type and desired wash.
Explains basic and additional options for wash cycles.
Stresses the need for High Efficiency detergents and their benefits.
How to calculate and set detergent concentration levels for optimal cleaning.
Instructions for adding HE detergent to bulk and single-load dispensers.
Guidance on adding liquid fabric softener to the designated compartment.
Steps for the first wash cycle and preparing laundry.
How to properly load the machine for optimal washing and drying.
Instructions for using the bleach dispenser.
How to choose wash programs, temperature, and spin speed.
Explains Automatic Drying and Timed Drying options.
Details settings like Soil Level, Extra Rinse, FanFresh, and Wrinkle Shield.
Managing Load & Go settings, concentration, control lock, and mute.
Accessing utility cycles and customizing user preferences.
Importance of removing clothes promptly after cycles to prevent issues.
How to schedule a cycle to start at a later time.
Keeping the appliance area clean and basic care recommendations.
Step-by-step guide for cleaning the rubber door seal.
Using cycles with cleaning products for thorough interior cleaning.
Instructions for cleaning both single-load and bulk dispenser systems.
Detailed steps for removing and reattaching dispenser drawers.
How to clean the removable bulk detergent/softener containers.
Guidance on inspecting and replacing water inlet hoses.
Steps for preparing the appliance for periods of inactivity.
Protecting the appliance from freezing during storage.
Procedures for safely moving and recommissioning the appliance.
Step-by-step guide to safely drain residual water from the pump filter.
Instructions for removing, cleaning, and reinserting the drain pump filter.
Tips for cleaning the door seal with specialized wipes.
Addresses appliance stability and movement issues.
Explains common noises and their potential causes.
Steps to identify and resolve water leaks from the appliance.
Specific solutions for leaks originating from the door.
Troubleshooting for cycles not running or performing as expected.
Solutions for issues with the touch controls not working.
Steps to resolve power, water supply, or fill issues.
Addresses problems with the door locking or unlocking mechanism.
Solutions for drain hose problems like clogs or improper installation.
Reasons for clothes being wet and how to improve spinning.
Explains the function of spinning without water addition.
Addresses issues related to water temperature during wash cycles.
Solutions for loads not being rinsed and stains not being removed.
Tips to prevent clothes from becoming wrinkled or tangled.
Identifies causes and solutions for fabric damage during wash cycles.
Causes and preventive measures for odors within the washer/dryer.
Solutions for preventing whites from becoming dingy and colors from fading.
Troubleshooting for dispenser malfunctions and packet dissolving problems.
Explains why cycle times may vary or be longer than expected.
Steps to resolve issues preventing the drying cycle from starting.
Diagnosing and fixing abnormal noises from the appliance.
Addresses clothes not drying properly, lint, wrinkles, and load heat.
Solutions for error codes F0E1, F0E2, F0E5 (OB).
Troubleshooting for F1E1, F1E2, F3E1, F3E2, F3E5, F3E6, F4E1, F4E2, F4E4, F5E1 codes.
Solutions for F5E2, F5E3, F5E4, F6E1, F6E2, F6E3 error codes.
Troubleshooting for motor control, temperature, and heater errors (F7E2 to F8E1).
Solutions for overflow (F8E3) and drain timeout/pump failure (F9E1).
Troubleshooting for Wi-Fi errors (FCE1) and power loss recovery (PF).
Details the warranty period, what's covered, and exclusions.
How to submit a warranty claim and required documentation.
Conditions that can render the warranty invalid.
Contact information for customer support centers across various countries.
General| Color | Chrome Shadow |
|---|---|
| Steam Function | Yes |
| Brand | Whirlpool |
| Model | 7MWFC9822HC |
| Voltage | 120 V |
| Washer Type | Front Load |
| Type | Washer |
| Energy Star Certified | Yes |
| Width | 27 in |
