How to fix a Whirlpool Washer/Dryer that won't turn on?
If your Whirlpool Washer/Dryer isn't turning on, make sure the plug is correctly inserted into the electrical outlet. Also, check for any power failures in your home. Ensure that the door is fully closed, as the machine won't start if it's not.
What to do if the wash cycle does not start on my Whirlpool Washer/Dryer?
If the wash cycle on your Whirlpool Washer/Dryer isn't starting, be sure that you've pressed the ON/OFF button and the START/PAUSE button. Check that the water tap is open to allow water to flow into the machine. If a start delay has been set, cancel it to begin the cycle immediately.
Why is my Whirlpool WWDE 7512 Washer/Dryer leaking water?
If your Whirlpool Washer/Dryer is leaking water, check that the water intake hose is tightened properly. Also, inspect the detergent dispenser to ensure it is not clogged. Make sure the drain hose is properly fastened.
What causes too much foam in my Whirlpool WWDE 7512 Washer/Dryer?
If too much foam is forming in your Whirlpool Washer/Dryer, it could be due to using a detergent that isn't compatible with the appliance. Ensure the detergent is suitable for washer dryers. It's also possible that you're using too much detergent, so try reducing the amount you use.
General| Brand | Whirlpool |
|---|---|
| Model | WWDE 7512 |
| Category | Washer/Dryer |
| Language | English |
Crucial information to be read and followed for safe operation.
Highlights the importance of user safety and the safety of others.
Explanation of hazard symbols indicating potential risks and their meanings.
List of common problems and their potential causes and solutions.
Causes and solutions for excessive foam formation during cycles.
Troubleshooting steps for when the appliance fails to power on.
Troubleshooting steps when the drying function is ineffective.
Steps to take if the wash cycle fails to initiate.
Troubleshooting for Wash&Dry function not filling with water.
Solutions for continuous loading and draining issues.
Steps to resolve issues with draining or spinning.
Causes and solutions for excessive vibration during spin.
Troubleshooting steps for water leakage from the appliance.
Diagnosis for specific LED error patterns on the control panel.
How to choose and adjust wash and dry programmes.
Steps for performing combined wash and dry cycles.
To Next Page
