To Next PageTo Next PageWhy is my Whirlpool ADG 7560/2 Dishwasher not working?
Your Whirlpool dishwasher might not be working due to several reasons: it might not be switched on (check the household circuit fuse if there is no power supply), the dishwasher door might not be closed properly (ensure the dishwasher’s door is closed), or the “Delayed start” option might be activated (reset the appliance if necessary).
Why are my dishes not dry in my Whirlpool dishwasher?
If your dishes are not drying in your Whirlpool dishwasher, it could be due to plastic containers not drying well (wipe them dry), clean dishes being left in the dishwasher too long (try releasing the door 5 minutes before removing the dishes), incorrect arrangement of items (arrange crockery so water doesn't collect in cavities), incorrect rinse aid dosage (increase the dosage), or selecting a rapid program (select a standard-length program for full loads).
What does it mean when the CANCEL/Off indicator lamp blinks 6 times on my Whirlpool dishwasher?
If the CANCEL/Off indicator lamp blinks 6 times on your Whirlpool dishwasher, it could be due to a closed water tap (ensure the water tap is open), a kinked water inlet hose or clogged inlet filters (ensure the hose is not kinked and the inlet filter is clean), or low water pressure (ensure the water tap is fully open during water inlet, providing a minimum of 0.5 litres per minute).
What to do if my Whirlpool ADG 7560/2 glasses have permanent deposits?
This phenomenon is irreversible. We recommend in future: - Change the control of system of dosage of softener. - Be careful – follow recommended detergent dosage. - For combined action tablets see detergent producer’s recommendations.
What does it mean when the CANCEL/Off indicator lamp blinks 8 times on my Whirlpool ADG 7560/2 Dishwasher?
If the CANCEL/Off indicator lamp blinks 8 times on your Whirlpool dishwasher, it could be due to dirty filters (clean the filters), a kinked drain hose (ensure the drain hose is not kinked), or a closed syphon hose connection (remove the closure disk of the syphon hose connection).
Why does the CANCEL/Off indicator lamp blink 6 times and the wash program end too early on my Whirlpool dishwasher?
If the CANCEL/Off indicator lamp blinks 6 times and the wash program ends too early with dirty and wet dishes, it may be because the filters are dirty or clogged (ensure the filters are clean), there is too little water in the system (arrange concave items facing downwards), the drain hose is incorrectly fitted (fit the drain hose correctly, leaving min. 200-400 mm from the lower edge for high mounted appliances), or there is a high level of foam inside (repeat without detergent or wait until foam disappears).
Why is the salt indicator lit on my Whirlpool dishwasher?
Set “Tablet” option; if this option is not available, it is normal for the salt indicator to light up.
Why does my Whirlpool ADG 7560/2 have regeneration salt residue deposits?
Your Whirlpool dishwasher might have regeneration salt residue deposits because the water is too hard (add more regeneration salt in areas with very hard water), the salt reservoir cap is open (close the cap properly), or there is not enough rinse aid (try adding more rinse aid if using a combined action detergent).
Why does my Whirlpool ADG 7560/2 Dishwasher have streaks?
If your Whirlpool dishwasher has streaks, it is because the rinse aid dosage is too high (reduce the rinse aid dosage; if using a combined action detergent, do not add any additional rinse aid).
Why does my Whirlpool ADG 7560/2 have other marks?
If your Whirlpool dishwasher has other marks, it is because the rinse aid dosage is too low (increase the rinse aid dosage; if you use a combined action detergent, possibly add more rinse aid).
General| Brand | Whirlpool |
|---|---|
| Model | ADG 7560/2 |
| Category | Dishwasher |
| Language | English |
Instructions for selecting a wash program using the Programs button.
Instructions for starting, pausing, and resuming a wash program.
Instructions for cancelling a program or switching off the control panel.
Details of wash programs, loading instructions, and consumption data.
Initial setup steps for the dishwasher, including water hardness setting.
Recommendations for detergent and salt usage based on water hardness levels.
Procedure for checking the salt reservoir indicator for salt refill needs.
Procedure for checking the rinse aid indicator and adjusting dosage.
Instructions for adding detergent, including tablet placement in the dispenser.
Guidance on arranging items in the upper rack for optimal washing.
Instructions for adjusting the upper rack's height for better space management.
Guidance on arranging items in the lower rack for optimal washing.
Instructions on how to remove the upper rack to accommodate larger items.
Overview of available programs and factors affecting program duration.
Steps for pausing, cancelling, or changing a program during a wash cycle.
Instructions for checking and cleaning the dishwasher's filters.
Instructions for cleaning spray arms to remove blockages and deposits.
Troubleshooting steps if the dishwasher fails to power on or start.
Diagnosing issues indicated by the CANCEL/Off lamp blinking six times.
Troubleshooting when a wash program finishes prematurely with unclean dishes.
Diagnosing issues indicated by the CANCEL/Off lamp blinking eight times.
Solutions for when crockery and cutlery are not perfectly clean or have food residues.
Troubleshooting when the salt indicator light remains on.
Addressing issues related to regeneration salt residue on dishes.
Troubleshooting why dishes are not drying properly at the end of a wash cycle.
Resolving discolouration of plastic components after washing.
Addressing issues with glassware appearing opaque or cloudy.
Dealing with removable deposits or films on washed glasses.
Troubleshooting steps to ensure glasses are sparkling after washing.
Addressing irreversible permanent deposits on glassware.
Resolving persistent stains and dirt on items like tea cups.
Troubleshooting and preventing rust marks on cutlery and dishes.
Addressing various other types of marks or residues found on crockery.
Troubleshooting to eliminate streaks left on dishes after the wash cycle.
Troubleshooting and resolving the issue of excessive suds formation in the dishwasher.
Information on recyclable packaging and initial inspection of the appliance.
Guidance for initial operation and tips for saving energy and water.
Safety measures for children and general warnings for appliance use.
Measures for frost resistance and proper disposal of the appliance.
Formal statement of compliance with European directives for the appliance.
