Whirlpool ADG 9995 - User Manual

To Next Page

-1-

Chart

PROGRAMME SELECTION BUTTON

Press button “P” (repeatedly) until the indicator of the required programme lights

up (see “Table of programmes” below).

BUTTON

OFF

BUTTON

START BUTTON

The indicator lights up during operation, flashes when a fault occurs and goes off at

the end of the programme.

START BUTTON RESET FUNCTION

Press this button for at least 2 seconds; the selected programme and options are

cancelled. Main failure displays (repeated flashing of the START indicator lamp) can be

cancelled by RESETTING. Detailed instructions are given in chapter “What to do if...”.

(see at right for options description)

1) Programme data obtained in conformity with European standard EN 50242, obtained under normal conditions

(without additional options) and may vary depending on conditions. Differences of up to 20 minutes are possible

with sensor programmes as a result of the appliance’s automatic calibration system.

2) Reference programme for energy label in compliance with EN 50242 regulations. - Note for Testing Institutes: fo

detailed information on the EN/Standard loading comparison test and other tests, contact the following address:

“nk_customer@whirlpool.com”.

Table of programmes

Deter-

gent

Consumption

Programmes

Available

options

Loading instructions

Litres kWh

Minutes

Aqua Steam 60-70°C

Delay

Automatic programme

recommended for heavily

soiled crockery with dried-on

or burnt food, for example

pans and saucepans. Thanks to

steam action, soaking or hand

pre treatment is no longer

needed. In addition sanitation is

ensured due to the high

temperature steam.

X 13-20 1.10-2.00 100-150

Quickwash 45°C

Delay

Lightly soiled crockery, with no

dried-on food.

* Use of

tablets not recommended.

11.0 0.80 30

Eco

50°C

Delay

Normally soiled crockery.

Energy-saving programme.

X 12.0 1.05 165

Intensive 70°C

Delay

Recommended programme for

heavily soiled crockery, especially

suitable for pots and pans.

X 14.0 1.55 155

Power Clean 70°C

Delay

Recommended programme for

heavily soiled crockery,

especially suitable for pots and

pans. Intensive wash with

additional water jets.

X 16.0 1.80 220

5019 396 01849ADG 9995

Options and display description

BEFORE USING THE APPLIANCE FOR THE

FIRST TIME CAREFULLY READ THIS QUICK

REFERENCE GUIDE AND THE ASSEMBLY

INSTRUCTIONS! THE GUARANTEE IS NOT

APPLICABLE IF FAULTS ARE CAUSED BY

INCORRECT USE OF THE APPLIANCE.

DELAYED START BUTTON

Press the button (repeatedly) to delay the start of

the programme by 3, 6 or 9 hours. Then press the

START button. The dishwasher will start at the set

time.

RINSE AID INDICATOR

When lit, the rinse aid

dispenser needs to be refilled.

SALT INDICATOR

When lit, the salt reservoir

needs to be refilled.

Quick reference guide

Need help?

Do you have a question about the Whirlpool ADG 9995 and is the answer not in the manual?

This document describes the Whirlpool ADG 9995 dishwasher, providing a quick reference guide for its operation, maintenance, and troubleshooting.

Function Description

The Whirlpool ADG 9995 is a dishwasher designed for household use, offering various wash programmes and options to ensure efficient cleaning of crockery and cutlery. It features an intuitive control panel with a programme selection button, a start button, and a delayed start option. The appliance is equipped with indicators for rinse aid and salt levels, alerting the user when refills are needed. A key feature is the "AquaSteam" programme, which utilizes steam action for heavily soiled items, eliminating the need for soaking or pre-treatment. The "Power Clean" function provides intensive washing for pots and pans through dedicated water jets. The dishwasher also incorporates an automatic calibration system for sensor programmes, adjusting cycle duration based on conditions.

Important Technical Specifications

Model: ADG 9995
Loading Capacity: 12 place settings
Energy Label Compliance: EN 50242 regulations
Operating Temperature Range: 5°C to 45°C ambient temperature
Water Inlet Temperature (Hot Water Mains): Up to 60°C (with "70°C Max" or "90°C Max" hose)
Minimum Water Inlet Capacity: 0.5 litres per minute
EC Directives Compliance: CE 2006/95/CE, 89/336/CE, 93/68/CE, and 2002/95/CE (RoHS Directive)
Programmes (examples from table):
- AquaSteam 60-70°C: 13-20 litres, 1.10-2.00 kWh, 100-150 minutes
- Quickwash 45°C: 11.0 litres, 0.80 kWh, 30 minutes
- Eco 50°C: 12.0 litres, 1.05 kWh, 165 minutes (Reference programme for energy label)
- Intensive 70°C: 14.0 litres, 1.55 kWh, 155 minutes
- Power Clean 70°C: 16.0 litres, 1.80 kWh, 220 minutes
Salt Reservoir Capacity: Min. 1.5 kg, Max. 2 kg

Usage Features

Programme Selection: Users select programmes by repeatedly pressing the "P" button until the desired programme indicator lights up.
Delayed Start: The "Delayed Start" button allows users to postpone the programme start by 3, 6, or 9 hours.
Detergent Type Setting: The dishwasher can be configured for powder/gel or various tablet types (2-in-1, 3-in-1, All-in-1). This setting is crucial for optimal cleaning and proper functioning of salt and rinse aid indicators.
Water Hardness Setting: Users must set the water hardness level (from Soft to Extremely Hard) based on their local water supply to ensure effective softening and prevent limescale. The factory setting is for medium-hard water.
Loading Flexibility:
- Cutlery Rack: Features two trays for cutlery and can be adjusted or removed to accommodate taller items in the upper rack.
- Upper Rack: Adjustable height to create more space in either the upper or lower rack, useful for loading long stem glasses or bulky items.
- Lower Rack: Includes vertical plate holders that can be folded down for loading pots. The "Power Clean" area in the lower rack is designed for pots and casseroles, which should be inclined towards the dedicated water jets.
Safety Features: Warnings are provided for hot steam when opening the door, risk of tripping on an open door, and handling sharp items. The appliance is designed to prevent children from playing with it and to store detergents safely.
Troubleshooting Guide: The manual includes a comprehensive "What to do if..." section, listing common faults (e.g., F1, F4, F6, F7, F8 errors) with possible causes and solutions, enabling users to remedy minor issues without contacting service.

Maintenance Features

Salt Reservoir Refill: The salt indicator lights up when the reservoir needs refilling. Salt is added before the first wash and when the indicator is lit. It's crucial to use only regeneration salt and not detergent.
Rinse Aid Dispenser Refill: The rinse aid indicator signals when a refill is needed. The dosage regulator can be adjusted (factory setting is position 4) to prevent streaks or ensure crockery is perfectly dry. Only recommended rinse aids for domestic dishwashers should be used.
Detergent Dispenser: Designed for easy filling with powder, gel, or a single tablet per cycle.
Filter Cleaning: The filter cylinder and fine sieve should be checked and cleaned regularly by unscrewing and rinsing them under running water.
Spray Arm Cleaning: The upper and lower spray arms can be unscrewed and removed to clean clogged nozzles, using toothpicks if necessary.
General Care: Users are advised to arrange crockery to allow free rotation of spray arms and proper water flow, and to only use dishwasher-proof items. The appliance should be disconnected from mains and water supply before cleaning or maintenance.
Frost Protection: If the appliance is exposed to frost risk, it must be completely drained, and the salt reservoir should contain at least 1 kg of dissolved regeneration salt.
Disposal: The appliance is manufactured with recyclable materials and should be disposed of according to local waste disposal regulations, making it unusable by cutting the power cord and breaking the door lock.