EasyManua.ls Logo

Whirlpool ADG 955 WHM User Manual

Whirlpool ADG 955 WHM
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SERVICE
Whirlpool Europe
Customer Services
Model ADG 955 WHM
Version 8542 955 10310 Page
Technical data 2 - 4
Spare part list 5 - 6
Exploded view 7 - 8
Circuit diagram 9
Program diagram 10
Text/Legend 11 - 17
Family Global A5
Service Manual
Dishwasher
integratable
ADG 955 WHM
ADG 955 WHM
This documentation is only intended for qualified technicians who are aware of the respec-
tive safety regulations.
Date: 19.03.1998 Subject to modification
Document-No.: 4812 718 13129
Question and Answer IconNeed help?

Do you have a question about the Whirlpool ADG 955 WHM and is the answer not in the manual?

Whirlpool ADG 955 WHM Specifications

General IconGeneral
BrandWhirlpool
ModelADG 955 WHM
CategoryDishwasher
LanguageEnglish

Summary

Technical Data

Dimension

Physical specifications of the appliance including height, width, depth, and weight.

Volume (normal program)

Details water volumes for various wash cycles like regeneration, prewash, and main wash.

Flow rates / Inlet volume

Specifies flow rates for components like spray pump, drain pump, and inlet valve.

Electrical Data

Covers voltage, power consumption, and fuse ratings for the appliance's electrical parts.

Regeneration

Details water hardness settings and salt consumption for the water softening system.

Spare Part List

Exploded View

Main Assembly Diagram

Visual layout of major appliance components and their placement.

Control Panel Components

Diagrams illustrating the control panel and related user interface parts.

Circuit Diagram

Electrical Schematic

Schematic representation of the appliance's electrical connections and components.

Component Legend

Explanation of symbols and abbreviations used in the circuit diagram.

Program Diagram

Program Sequence Table

Details wash program steps, timings, and component activations.

Program Sequence LEDs

Explanation of LED indicators used to show program stages.

Text/Legend

Service Test Program Procedures

Instructions for executing passive and active test programs for diagnostics.

Failure and Alarm Diagnosis

Explains error codes (F0-F9), their causes, and troubleshooting steps.

Control Board Testpoints

Guide for checking control board signals and voltages using testpoints.

Related product manuals