Why won't my Whirlpool ADG 201 Dishwasher start or respond to controls?
If your Whirlpool dishwasher won't start or respond, here are a few things to check: * Ensure the water supply tap is turned on. * Try turning the dishwasher off and on again. Wait a minute before restarting the wash cycle. * Verify the dishwasher is properly plugged in, and try a different outlet. * Make sure the dishwasher door is fully closed.
What to do if my Whirlpool Dishwasher won't drain water?
If water isn't draining from your Whirlpool dishwasher, consider the following: * Wait until the wash cycle has finished. * Check the water drain hose for any bends. * Ensure the drain duct isn't clogged. * Clean the filter to remove any food residue. * Verify the height of the drain hose is correct.
How to fix a Whirlpool Dishwasher that is not cleaning dishes properly?
If your Whirlpool dishwasher isn't cleaning dishes well, consider these points: * Make sure that the dishes are arranged properly. * Ensure the spray arms can rotate freely without being blocked by dishes. * Avoid using too much detergent or detergent that is not suitable for dishwashers. * Make sure that the height of the dishes is compatible with the rack adjustment.
Why are my dishes not drying properly in my Whirlpool ADG 201 Dishwasher?
If your crockery isn't drying properly in your Whirlpool dishwasher: * Check if you've selected a wash cycle without a drying program. * Ensure the rinse aid dispenser setting is appropriate. * Note that crockery made from non-stick material or plastic may retain water drops, which is normal.
What to do if my Whirlpool ADG 201 Dishwasher won’t load any water and has flashing lights?
If your Whirlpool dishwasher won’t load water and has flashing lights, check these: * Ensure the water supply is on and the tap isn't shut off. * Check the water inlet hose for bends. * Clean the filters if they're clogged. * Clean the drain duct if it's clogged. After checking and cleaning, try switching the dishwasher off and on, then start a new wash cycle.
How to stop my Whirlpool ADG 201 Dishwasher from making excessive noise?
To reduce excessive noise from your Whirlpool dishwasher: * Ensure dishes aren't rattling against each other or the spray arms. Place dishes properly and ensure the spray arms can rotate freely. * Make sure you are not using too much detergent, or detergent that is not suitable for dishwashers, as this can cause too much foam.
Why are there white film or limescale deposits on my dishes and glasses from my Whirlpool Dishwasher?
If you notice a white film or limescale deposits on your dishes and glasses after using your Whirlpool dishwasher, check the following: * Ensure you're using refined salt. * Adjust the water hardness setting to a suitable level. * Make sure the salt and rinse-aid dispenser caps are properly closed. * Check if the rinse aid has been used up or if the dosage is too low.
Why won't the door close on my Whirlpool ADG 201?
If the door of your Whirlpool dishwasher won’t close: * Ensure the racks are fully inserted. * If the lock was released, push the door firmly until you hear a “clacking” noise.
Why do my dishes and glasses have streaks or a bluish tinge after using my Whirlpool Dishwasher?
If your dishes and glasses have streaks or a bluish tinge after being washed in your Whirlpool dishwasher, the rinse aid dosage might be too high.
Crucial safety guidelines for using the dishwasher to prevent accidents and ensure safe operation.
Guidelines for safe electrical grounding and correct operation of the dishwasher to prevent hazards.
Instructions on environmentally responsible disposal of the appliance and packaging materials.
Information on how to contact customer support and what details to provide for troubleshooting.
Technical specifications and data about the dishwasher, including energy efficiency and consumption.
Step-by-step instructions for the correct installation of the dishwasher, including water and electrical connections.
Overview of the dishwasher's parts and components, including diagrams of the interior and control panel.
Guidance on using and refilling salt and rinse aid for optimal washing and drying performance.
Instructions on how to properly arrange dishes and cutlery in the racks for effective washing and drying.
Information on selecting and measuring detergent, and how to start and manage wash cycles.
Details on different wash cycles, their duration, water, and energy consumption.
Instructions for cleaning and maintaining the dishwasher to ensure longevity and optimal performance.
Potential causes and solutions when the dishwasher fails to start or respond to controls.
Troubleshooting steps for issues related to water not draining from the dishwasher.
Troubleshooting steps for dishes not coming out clean, including loading, spray arms, and cycle selection.
General| Door color | Not applicable |
|---|---|
| Cord length | 1.3 m |
| Control type | Buttons, Touch |
| Product size | Full size (60 cm) |
| Built-in display | No |
| Inlet hose length | 1.5 m |
| Appliance placement | Fully built-in |
| Control panel color | Black |
| Upper basket adjustable height | Yes |
| Current | 13 A |
| Connected load | 1900 W |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Power consumption (off) | 0.5 W |
| Water consumption per cycle | 10 L |
| Energy consumption per cycle | 0.83 kWh |
| Drying class | A |
| Annual water consumption | 2800 L |
| Annual energy consumption | 237 kWh |
| Cycle time | 180 min |
| Noise level | 51 dB |
| Dishwashing programs | - |
| Number of place settings | 10 place settings |
| Number of washing programs | 6 |
| Package depth | 675 mm |
| Package width | 500 mm |
| Package weight | 33500 g |
Weight and Dimensions| Depth | 555 mm |
|---|---|
| Width | 448 mm |
| Height | 820 mm |
| Weight | 31500 g |
| Installation compartment depth | 570 mm |
| Installation compartment width | 450 mm |
To Next Page