To Next PageTo Next Page
Need help?Do you have a question about the Whirlpool ADP 554 WH and is the answer not in the manual?
General| Type | Freestanding |
|---|---|
| Number of Place Settings | 12 |
| Noise Level | 49 dB |
| Wash Programs | 6 |
| Height | 85 cm |
| Width | 60 cm |
| Depth | 60 cm |
| Color | White |
| Delay Start | Yes |
| Half Load | Yes |
| Child Lock | No |
Physical dimensions of the dishwasher including height, width, depth, and weight.
Lists the sequence of programs and their succession steps.
Details on energy performance, cleaning, drying, and reference program.
Program details: water/energy consumption, duration, and noise level.
Water capacity details including basic, safety, and overflow levels.
Specifies flow rates for spray pump, drain pump, and water inlet electrovalve.
Details on inlet and spray pump pressure requirements.
Rotational speeds for spray pump motor, drain pump motor, and spray arms.
Electrical specifications: voltage, frequency, power, and fuses.
Information on the timer model and basic/normal step times.
Details on the heating element system, including voltage, power, and resistance.
Technical specifications for the heating element system.
Specifications for spray pump motor and drainpump motor.
Power consumption and resistance for the spray pump motor.
Power consumption and resistance for the drainpump motor.
Voltage and resistance for the timer motor.
Specifications for water inlet valve.
Voltage, power, and resistance of the water inlet valve.
Voltage, power, and resistance of the regeneration valve.
Type, temperatures, and reset value for the NTC thermostat.
Details on regeneration level switching and reset points.
Switching and reset points for water levels in regeneration.
Volume, steps, water hardness, and salt consumption details.
