Do you have a question about the Whirlpool AWZ 9995 and is the answer not in the manual?
Use the knob to select program, press "Départ (Pause)" to start/pause. Indicator lamp flashes during selection, lights up during drying.
Lamps for Water Container, Filter, Overdry protection, and Delayed Start indicate machine status and maintenance needs.
Shows calculated drying time, updated during the cycle. Flashing lines indicate ongoing calculation.
Steps include Overdry protection, Drying phase, End of cycle, and Anti-crease phase.
Options like Gentle, Rapid, Buzzer, Anti-crease Plus, and Delayed Start modify the drying process.
Sort laundry by care symbols. Check fastenings, empty pockets, and turn items inside out.
Place laundry loosely, close door, select programme, press "Départ (Pause)" to start.
Interrupt by setting knob to 'Arrêt'. End programme by removing laundry after cooling down.
Set programme knob to 'Arrêt'. Clean lint filter after every cycle and empty water container.
Details drying levels (Cupboard dry, Iron dry) for cotton textiles with options and times.
Details drying levels for synthetic/mixed fabrics with options and times.
Details drying for delicate items (Fibres sensibles) with options and times.
Details Airing (30 min refresh) and fixed duration programmes (20', 40', 60').
Instructions for cleaning the lint filter, water container, and heat exchanger.
Checks for power, door closure, programme selection, and button press.
Troubleshooting for lint filter or water container indicator lamps.
Checks for incorrect programme, wet laundry, dirty filters, or high room temperature.