Whirlpool AWZ 9993 - User Manual

5019 307 00485
GB
AWZ 9993
Quick Reference Guide
Before using the machine, please also read the instructions for use carefully!
(Subject to technical modifications)
Whirlpool is a registered trademark of Whirlpool USA
Programme selector knob
The drying programme is selected by turning
this knob.
}²¥¶®¬q¥¤·¬

button
The drying programme is started by pressing
this button. The indicator lamp flashes during
the selection phase and lights up during
drying.
Indicator lamps
Filter
The indicator lamp lights up when the filter
and/or heat exchanger need cleaning.
Clean the filter at the end of every cycle.
Water container
The indicator lamp lights up when the water
container needs to be emptied. The drying
cycle is automatically interrupted. Empty the
container and restart the drying programme.
Empty the water container after every
drying cycle
.
Time remaining display
Depending on the programme selected, once
the drying cycle has been started, a default
drying time is displayed. The time displayed is
corrected by a few minutes depending on the
volume, type and dampness of the laundry.
The drying time specified is a calculated
value which will be updated during the
drying programme.
Overdry Protection
The indicator lamp lights up when a humidity
controlled programme is selected, to indicate
the working protection function. Function is
not active in time controlled programmes
20'
40' 60'
and Airing “ ”.
Programme sequence
6
th
Sense
Drying
End
of cycle
Anti-
crease
Options
Gentle
Reduces drying intensity
(recommended for delicate items).
Rapid
Shortens drying duration (recommended for
thin items of the same size).
Buzzer
Signals/sounds end of drying cycle.
Anti-crease
Prevents laundry from creasing up to 12
hours. Buzzer and Anti-crease cannot be
selected together.
Delayed Start
Delays the start of the drying cycle by 1 to 12
hours.
Each time the button is pressed, the start
time is delayed by 1 hour.
Then press the
}²¥¶®¬q¥¤·¬
button to
confirm the final selection and to start the
dryer.
The delayed start indicator lamp flashes and
the countdown counts down in 1-hour
intervals. The countdown is indicated by the
indicator lamp above the button flashing.
During the countdown, the drum will turn
from time to time to re-distribute the
laundry. To cancel or change the previously
set time delay, set the programme selector
knob to
“”
or open the door.
+

Summary

Indicator Lamps

Filter Indicator

Lamp lights up when filter/heat exchanger needs cleaning.

Water Container Indicator

Lamp lights up when water container needs emptying; cycle interrupts.

Drying Options

Gentle Option

Reduces drying intensity, recommended for delicate items.

Rapid Option

Shortens drying duration, recommended for thin items.

Buzzer Option

Signals the end of the drying cycle.

Anti-crease Option

Prevents laundry from creasing up to 12 hours.

Delayed Start Option

Delays the start of the drying cycle by 1 to 12 hours.

Machine Operation Guide

Sorting and Preparing Laundry

Sort laundry by care symbols and prepare it before drying.

Loading and Starting the Dryer

Load laundry, close door, select programme, and start the cycle.

Programme End and Unloading

Take laundry out after drying, manage anti-crease phase.

Switching Dryer Off

Turn the programme selector knob to the 'Off' position.

Dryer Maintenance and Troubleshooting

Routine Care and Cleaning

Clean the lint filter after every cycle and empty the water container.

Troubleshooting: Dryer Not Operating

Check power, fuse, door closure, programme, and start button.

Troubleshooting: Indicator Lamps

Check lint filter and water container status and proper insertion.

Troubleshooting: Water Droplets

Inspect heat exchanger, seals, and water container insertion.

Whirlpool AWZ 9993 Specifications

General

Brand	Whirlpool
Model	AWZ 9993
Category	Washer
Language	English