Do you have a question about the Whirlpool Design Series and is the answer not in the manual?
Requires multi-pole switch with ≥3mm contact opening per pole.
Use specified lead; ensure longer earth wire; integrate into equipotential system.
Work by qualified staff; contact authorized center for detailed assistance.
Ensure water in bain-marie; protect glass top, clean daily.
Overview of LEDs, switches, and thermostats on the control panel.
Open valve, turn on switch, fill tank to overflow mark.
Requires multi-pole switch with ≥3mm contact opening per pole.
Use specified lead; ensure longer earth wire; integrate into equipotential system.
Work by qualified staff; contact authorized center for detailed assistance.
Ensure water in bain-marie; protect glass top, clean daily.
Overview of LEDs, switches, and thermostats on the control panel.
Open valve, turn on switch, fill tank to overflow mark.












Loading...