Adjusting salt cons
umption
Adjust the water softener according to how hard your tap water is.
Move the programme selector knob to the 0 (Reset) position while your machine
is not in operation.1
After resetting you
r machine, press the Start/Pause button and keep it pressed
down.2
Meanwhile, energise the machine by pressing the Power On/Off button. 4
Keep Start/Pause keys press until program monitor lights are on and off. 2
After the lamps “Wash/Dry/End” have flashed 3 , release the Star
t/Pause
button. 2
Your machine displa
ys the latest entered water hardness setting.
You can adjust the levels by pressing the Start/Pause button 2 according to
Table of Water H
ardness Level Settings.
After adjusting the water hardness level , press on/off button to save the
settings in memory. 4
13
To Next Page
Loading...
