Whirlpool LSA 1100 - Features; Load Sensing Function

RID#1 Main Function
RID#1 .1 LOAD SENSING
Load Sensing Animation
1) Decides the Required Water level with
respect to the Mass of Cloth Load
a)
P1 (Daily Wash) and P6(Bed linen) programs will follow this Load
process
b)
Finalize the water level by slot sensor output data during 60 sec of
sensing between 30
RID#1 .2 KEY LOCK
1)
In order to lock the Keys, Press Delay End and Extra Rinse key simultaneously so that
Keys will get Locked & the correspondi
2)
Key lock can be invoked only when the system is in running mode.
3)
There will be no response for any key press while the system remains in
Key Lock mode and the corresponding LED will blink 5 times.
4)
In order to unlock, Press Dela
5)
During Errors, Key lock feature will get disabled for Power & start/pause
key depending on the type of Errors.
RID#1 .3 6
th
SENSE
1) 6
th
Sense LED will be turned ON whenever Load sensing happens
will remain
ON throughout that Cycle and this LED
whenever Error pops up
RID#1 .4 EXTRA RINSE
1)
Extra Rinse selection will be improving the Rinseability performance
whenever the laundry requires
2)
2X/3X selection will result in 2 / 3 Rinse Phases of a sele
FEATURES
Load Sensing Animation
1) Decides the Required Water level with
respect to the Mass of Cloth Load
P1 (Daily Wash) and P6(Bed linen) programs will follow this Load
process
Finalize the water level by slot sensor output data during 60 sec of
sensing between 30
-150 rpm
In order to lock the Keys, Press Delay End and Extra Rinse key simultaneously so that
Keys will get Locked & the correspondi
ng LED will start glowing.
Key lock can be invoked only when the system is in running mode.
There will be no response for any key press while the system remains in
Key Lock mode and the corresponding LED will blink 5 times.
In order to unlock, Press Dela
y End and Extra Rinse key simultaneously
During Errors, Key lock feature will get disabled for Power & start/pause
key depending on the type of Errors.
Sense LED will be turned ON whenever Load sensing happens
ON throughout that Cycle and this LED
will go to Off
whenever Error pops up
Extra Rinse selection will be improving the Rinseability performance
whenever the laundry requires
2X/3X selection will result in 2 / 3 Rinse Phases of a sele
cted cycle
SERVICE MANUAL
Page | 19
P1 (Daily Wash) and P6(Bed linen) programs will follow this Load
sensing
Finalize the water level by slot sensor output data during 60 sec of
In order to lock the Keys, Press Delay End and Extra Rinse key simultaneously so that
ng LED will start glowing.
Key lock can be invoked only when the system is in running mode.
There will be no response for any key press while the system remains in
y End and Extra Rinse key simultaneously
During Errors, Key lock feature will get disabled for Power & start/pause
Sense LED will be turned ON whenever Load sensing happens
and it
will go to Off
Extra Rinse selection will be improving the Rinseability performance
cted cycle