EasyManua.ls Logo

Whirlpool Maytag W11416805 User Manual

Whirlpool Maytag W11416805
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Technical Manual
7.4 / 8.8 Cu. Ft. Dryer
W11416805
Multimedia
Enhanced
Maytag® and Whirlpool®
Question and Answer IconNeed help?

Do you have a question about the Whirlpool Maytag W11416805 and is the answer not in the manual?

Whirlpool Maytag W11416805 Specifications

General IconGeneral
Part NumberW11416805
CategoryDryer
BrandWhirlpool Maytag
Model NumberW11416805
TypeElectric
Energy SourceElectric

Summary

General Information

Dryer Safety

Provides critical safety instructions for operating and servicing the dryer.

Product Specifications

Details the technical specifications, dimensions, and features of the dryer models.

Model and Serial Number Location

Illustrates the location of the model and serial number label on the appliance.

Model Nomenclature

Explains the coding system used for identifying Whirlpool and Maytag dryer model numbers.

Tech Sheet Location

Shows where the technical service sheet is located on the appliance for reference.

Diagnostics and Troubleshooting

Safety

Outlines critical safety precautions and hazards for service technicians.

Service Guide

Provides essential checks and guidelines before performing any service procedures.

Activating Service Mode

Step-by-step instructions for entering the dryer's service diagnostic mode.

Service Mode Function

Lists and describes the various diagnostic functions available within service mode.

Sensor Feedback Function Chart

Details sensor feedback values and their expected behaviors during diagnostic testing.

Service Diagnostics Chart

Outlines a diagnostic cycle for testing dryer components and overall functionality.

Faults and Error Codes

Lists common fault codes, their descriptions, and recommended troubleshooting steps.

Troubleshooting Guide

Provides a systematic approach to diagnosing and resolving common dryer operational problems.

Component Testing

Safety

Emphasizes safety procedures, voltage measurement, and ESD precautions during testing.

Main Control (ACU) Connectors and Pinouts

Diagrams and lists ACU connectors, pinouts, and their associated components for testing.

Troubleshooting Tests

Detailed procedures for testing various electrical and mechanical components of the dryer.

Troubleshooting Guide for Connected Dryer

Guidance for resolving issues with the dryer's Wi-Fi and smart connectivity features.

Strip Circuits

Visual circuit diagrams used for diagnosing specific component and system issues.

Wiring Diagrams

Visual representations of the dryer's electrical circuits for troubleshooting and repair.

Component Location

Illustrates the physical location of various dryer components for easy access.

Component Access

Removing the Door Assembly

Step-by-step guide to safely remove the dryer door for access or replacement.

Removing the Console/User Interface (UI) and Top Panel

Instructions for accessing internal components by removing the console and top panel.

Removing the Appliance Control Unit (ACU)

Detailed steps for safely removing the main control board (ACU) from the dryer.

Removing the Front Panel and Door Switch

Procedures for removing the front panel and its associated door switch component.

Removing the Drum Light and Moisture Sensor

Guides for accessing and removing the drum light and moisture sensor components.

Removing the Belt, Drum, and Rollers

Instructions for disassembling and removing the drum belt, drum, and supporting rollers.

Removing the Drive Motor

Steps to safely remove and replace the dryer's drive motor assembly.

Removing the Thermal Fuse and Outlet Thermistor

Guide for accessing and replacing the thermal fuse and outlet thermistor components.

Removing the Heater, High Limit Thermostat, and Thermal Cutoff (Electric Models Only)

Instructions for accessing and replacing heating system components in electric models.

Removing the Ignitor, Flame Sensor, High-Limit Thermostat, and Thermal Cutoff (Gas Models Only)

Procedures for accessing and replacing ignition and safety components in gas models.

Removing the Gas Burner Assembly Coils (Gas Models Only)

Steps to remove the gas burner assembly coils for servicing gas dryer models.

Removing the Water Valve (On Some Models)

Instructions for accessing and removing the water valve assembly on specific dryer models.

Related product manuals