To Next PageTo Next Page
Need help?Do you have a question about the Whirlpool W10741197A and is the answer not in the manual?
General| Brand | Whirlpool |
|---|---|
| Part Number | W10741197A |
| Color | Stainless Steel |
| Energy Star Certified | Yes |
| Type | Built-In |
| Category | Dishwasher |
| Sub-Category | Built-In |
Lists necessary tools and parts for dishwasher installation.
Lists optional parts and additional tools required for installation.
Explains the use of an air gap for drain hose connection.
Instructions for connecting via power cord or direct wire.
Instructions for preparing cabinet with existing utilities.
Instructions for preparing cabinet with new utilities.
Guides on preparing and routing electrical supply.
Instructions for drilling holes for water line.
Guide for measuring and preparing water supply line.
Steps to flush and secure the water supply line.
Instructions for drilling holes and routing the drain hose.
Connecting drain hose to disposer with/without air gap.
Connecting drain hose to waste tee with/without air gap.
Steps to remove the disposer knockout plug.
Warnings about tip-over and excessive weight hazards.
Steps to remove foam blocks and packing materials.
Instructions for placing the dishwasher on its back.
Steps to access terminal box, install strain relief, and connect wires.
How to measure the cabinet opening for installation.
Adjusting front legs and wheels for proper height and leveling.
Adding shims for built-up floors.
Method for attaching dishwasher to countertop.
Method for attaching dishwasher to cabinet sides.
Guidance on moving the dishwasher into position.
Verifying water and drain hose placement.
Adjusting door tension for proper closing.
Aligning the dishwasher door with cabinet doors.
Securing the 90° elbow fitting to the water valve.
Verifying the water supply connection for leaks.
Connecting the drain hose to the waste outlet.
Accessing terminal box and installing strain relief.
Routing the direct wire cable into the terminal box.
Connecting the ground wire for direct wiring.
Connecting the remaining wires for direct wiring.
Securing cable and reinstalling terminal box cover.
Verifying alignment and spacing within the cabinet.
Steps for securing the dishwasher to the cabinet or countertop.
Checking door clearance for attachment methods.
Reinstalling the plastic access panel.
Reinstalling the metal access panel.
Restoring electrical power to the dishwasher.
Checking if the dishwasher is working properly.
Solutions for common operational problems.
Advice on energy efficiency and drying performance.
