EN
Quick guide
* Available only on certain models
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT
In order to receive a more complete assistance, please
register your product on www . whirlpool . eu/ register
Before using the appliance carefully read the Safety
Instruction.
FIRST TIME USE
After installation, wait at least two hours before connecting the appliance to
the power supply. Once connected, it will start working automatically. The
ideal temperature settings are preset from the factory.
After turning the appliance on, wait 4-6 hours for it to reach the correct food
storage temperature.
CONTROL PANEL
1. On/o
2. Fast Cool button
3. Fridge temperature setting
4. Refrigerator temperature display
5. Alarm
6. Freezer temperature display
7. Freezer temperature setting
8. Fast Freeze
9. ECO / ECOPlus
10. Good Night
1
2
4
7
8
9
6
5
3
10
ON/OFF
To switch on/switch o the product press on/o on the display.
FAST COOL FUNCTION
You can enable or disable the Fast Cool feature (quick cooling of both fresh
and just cooked food) by pressing the Fast Cool key on the display. The Fast
Cool led turns on when activated. The function is automatically disabled
after 12 hours, or can be manually disabled by pressing the Fast Cool button.
FRIDGE TEMPERATURE SETTING
Used to modify the temperature setting of the refrigerator. Conrmation
corresponding to the selected temperature appears on the display.
Recommended setting for the refrigerator compartment is +4°C.
ALARM
An alarm situation has been detected in the product (see alarm table).
REFRIGERATOR TEMPERATURE DISPLAY
Shows the set temperature for the refrigerator compartment.
FREEZER TEMPERATURE DISPLAY
Shows the set temperature for the freezer compartment.
FREEZER TEMPERATURE SETTING
Used to modify the temperature setting of the freezer. Conrmation
corresponding to the selected temperature appears on the display.
Recommended setting for the freezer compartment is -18°C.
FAST FREEZE FUNCTION
This function is recommended for freezing fresh food. Fresh food should
be frozen as quickly as possible, for the best possible preservation and for
keeping its nutritional value. Press the Fast Freeze key when you need to
freeze fresh food, the Fast Freeze indicator will come on. We recommend
you press the Fast Freeze key 24 hours before putting the food in, in order to
prepare the freezer compartment for the best possible freezing conditions.
We recommend you use the bottom drawer to maximize the freezing
capacity. The Fast Freeze function is automatically deactivated after 48
hours, or you can disable it manually by pressing the Fast Freeze key.
ECO
You can use this function to optimize energy consumption of the product.
Activate or deactivate the ECO function by pressing the ECO key on the
display. The light of the ECO on the display is on when activated. The
temperature values +5°C and -18°C appear on the refrigerator and freezer
displays respectively.
Note: The ECO key can enable ECOPlus function.
ECOPLUS
You can use this function to decrease energy consumption of the product
by blanking the control panel when no interaction is needed. To activate the
ECOPlus function press and hold the ECO key for 8 seconds. After 5 seconds
from activation all the digits and LED light switch o, except for the ECO
light that keeps blinking. You can press any key to wake up the display and
make your adjustments. 5 seconds after no interaction, the display returns
to ECOPlus mode. Deactivate the ECOPlus function using ON/OFF key or
press any other function key.
GOOD NIGHT
The Good Night function makes it possible to minimize any noise, at the
same time ensuring suitable storage performance.
The compressor will be working at the minimum speed that can be set.
When you start the function, the display enters into standby mode and
the relevant Good Night icon lights up. The Good Night function can
automatically stop either after maximum 6 hours or after the performance
of the product with the function ON can no longer be ensured owing to a
number of dierent reasons.
To stop the function manually press the button again or switch o the
device - we recommend starting the function in the night hours or
minimizing any interaction with the fridge to prevent the function from
stopping automatically.
LED LIGHT
This product contains a light source of energy eciency class F.
If the LED light system does not work, please contact the Service to replace
it.
Important: The refrigerator compartment light switches on when the
refrigerator door is opened. If the door is kept open for more than 8 minutes
the light will be automatically switched o.
To Next Page
Need help?
General
