MSEX0025_rev01
29
4) To remove the doors use a large srewdriver to loosen the screws
attaching the upper hinge, lower hinge , intermediate
hinge and intermediate hinge complement
5) Install the lower hinge on the left side;
6) Using a large phillips wrench, open one hole (using impact) on the left side bottom End Cap
refrigerator door, at the place indicated
7) Install the left Stop Bushing on the left-hand, that was ordered
8) Remove the right Stop Bushing and connect on the right side (bottom End Cap
Refrigerator Door ) the plug that was ordered
To Next Page