To Next PageTo Next PageWhy is my Whirlpool Cooktop not turning on?
If your Whirlpool Cooktop isn't operating, first check your household fuse or circuit breaker and replace the fuse or reset the breaker. If the problem persists after this, it is possible that the cooktop isn’t wired properly, refer to the Installation Instructions for proper wiring.
What to do if my Whirlpool WCE55US0H Cooktop will not turn on?
If your Whirlpool Cooktop won't operate, make sure the control knob is correctly set by pushing it in before turning to a setting. Also, ensure that the Control Lock is not set by pressing and holding the "Control Lock" for 3 seconds. If one or more burners stopped working during use, allow the cooktop to cool down for 30 minutes before turning the burner on again.
Why is my Whirlpool Cooktop beeping?
If your Whirlpool Cooktop is beeping, it might be because a key is being pressed and held. Remove any objects from the control area and wipe any debris from the control panel. If the beeping continues for more than 15 minutes, the control panel will lock, and the F2E1 code will appear in the display.
What to do if my Whirlpool Cooktop is displaying F2E1 code?
If your Whirlpool Cooktop is displaying the F2E1 code, it indicates that one or more keys are permanently pressed. Make sure the cooktop controls are off. Clean the cooktop touch control panel thoroughly. Disconnect power or unplug the cooktop, wait for 1 minute, and then reconnect the power or plug it back in. If the error returns after 1 minute, call for service.
Why does my Whirlpool WCE55US0H have flashing lights?
If your Whirlpool Cooktop has flashing lights, ensure the cooktop controls are OFF. Also, check if one or more keys are permanently pressed. In this case, clean the cooktop touch control panel thoroughly. If this doesn't solve the issue, disconnect power or unplug the cooktop, wait 1 minute, and then reconnect the power or plug it back in. If the lights continue to blink, call for service.
Why are my Whirlpool WCE55US0H cooking results not as expected?
If your Whirlpool Cooktop cooking results are not as expected, it could be due to several reasons. Ensure you are using proper cookware. Also, verify that the control knob is set to the proper heat level. Make sure the cooktop is level. If certain power levels seem to take longer, allow the cooktop to cool down for 30 minutes to resume normal cooking performance.
Why is there excessive heat around cookware on my Whirlpool WCE55US0H Cooktop?
Excessive heat around cookware on your Whirlpool Cooktop may be due to using the wrong size cookware. Use cookware about the same size as the surface cooking area, element, or surface burner. Cookware should not extend more than ½” (1.3 cm) outside the cooking area. Also, remember that when the cooktop is in use, the entire cooktop area may become hot.
Explains safety alert symbols, DANGER, and WARNING messages for hazard identification.
Notifies about chemicals known to cause cancer or reproductive harm as per state law.
Covers proper installation, unattended use, child safety, apparel, and handling hot surfaces.
Details the control panel layout and touch controls for different models.
Identifies the various cooking zones and features of the touch-activated cooktop.
Explains how to connect to network, SAID code, and MAC address for Wi-Fi.
Details how to operate heating elements using touch controls and power levels.
Explains how to use dual and triple size elements for different cookware and food quantities.
Describes the function of the 'H' indicator for hot cooking areas.
Explains the indicator light that glows when any element is on.
Instructions on how to activate and deactivate the control lock feature.
Guide on setting, adjusting, and canceling the built-in kitchen timer.
Diagrams and labels for control panels on knob-controlled models.
Identifies cooking areas and features for knob-controlled ceramic glass cooktops.
Explains how to use heat settings and dual/triple elements with knob controls.
Details the function of hot surface indicators and power lights on knob models.
Provides guidelines for using and caring for ceramic glass cooktops, including cookware.
Offers advice for safe and effective home canning on the cooktop.
Details ideal cookware types, materials, and flatness for optimal cooking.
Instructions for general cleaning of the cooktop and its controls.
Specific methods and recommended cleaners for stainless steel cooktop surfaces.
Guidance on cleaning the control panel and knobs without causing damage.
Step-by-step instructions for cleaning ceramic glass using a scraper and cleaner.
Diagnoses issues like no power, improper wiring, or incorrect control settings.
Addresses problems with excessive heat, unexpected results, beeping, or flashing lights.
Explains the F2E1 code, indicating stuck keys, and troubleshooting steps.
Provides contact details and services offered by Whirlpool in the United States.
Provides contact details and services offered by Whirlpool in Canada.
Provides contact details and services offered by Whirlpool in Mexico.
Information on how to order FSP® replacement parts and various accessories.
Explains safety alert symbols, DANGER, and WARNING messages for hazard identification.
Notifies about chemicals known to cause cancer or reproductive harm as per state law.
Covers proper installation, unattended use, child safety, apparel, and handling hot surfaces.
Details the control panel layout and touch controls for different models.
Identifies the various cooking zones and features of the touch-activated cooktop.
Explains how to connect to network, SAID code, and MAC address for Wi-Fi.
Details how to operate heating elements using touch controls and power levels.
Explains how to use dual and triple size elements for different cookware and food quantities.
Describes the function of the 'H' indicator for hot cooking areas.
Explains the indicator light that glows when any element is on.
Instructions on how to activate and deactivate the control lock feature.
Guide on setting, adjusting, and canceling the built-in kitchen timer.
Diagrams and labels for control panels on knob-controlled models.
Identifies cooking areas and features for knob-controlled ceramic glass cooktops.
Explains how to use heat settings and dual/triple elements with knob controls.
Details the function of hot surface indicators and power lights on knob models.
Provides guidelines for using and caring for ceramic glass cooktops, including cookware.
Offers advice for safe and effective home canning on the cooktop.
Details ideal cookware types, materials, and flatness for optimal cooking.
Instructions for general cleaning of the cooktop and its controls.
Specific methods and recommended cleaners for stainless steel cooktop surfaces.
Guidance on cleaning the control panel and knobs without causing damage.
Step-by-step instructions for cleaning ceramic glass using a scraper and cleaner.
Diagnoses issues like no power, improper wiring, or incorrect control settings.
Addresses problems with excessive heat, unexpected results, beeping, or flashing lights.
Explains the F2E1 code, indicating stuck keys, and troubleshooting steps.
Provides contact details and services offered by Whirlpool in the United States.
Provides contact details and services offered by Whirlpool in Canada.
Provides contact details and services offered by Whirlpool in Mexico.
Information on how to order FSP® replacement parts and various accessories.
General| Fuel Type | Electric |
|---|---|
| Product Type | Cooktop |
| Number of Burners | 4 |
| Number of Elements | 4 |
| Surface Material | Glass |
| Cooktop Surface | Smooth |
| Width | 30 inches |
| Power | 240 V |
| Burner Type | Radiant |
| Voltage | 240 V |
| Installation Type | Drop-In |
| Color | Black |
| Dimensions (W x D) | 30 x 21 inches |
| Weight | 50 lbs |
| Type | Electric |
| Control Type | Knob |
| Burner Size | 6 in, 9 in |
