To Next PageTo Next Page
Need help?Do you have a question about the Whirlpool WED4815EW and is the answer not in the manual?
General| Capacity | 7.0 cu. ft. |
|---|---|
| Fuel Type | Electric |
| Drum Material | Powder Coat |
| Control Type | Knobs |
| Color | White |
| Voltage | 240 V |
| Number of Drying Cycles | 12 |
| Temperature Settings | 3 |
| Wrinkle Control Option | Yes |
| Moisture Sensor | No |
| Vent Type | 4-Way Venting |
Explains safety alert symbols, DANGER, and WARNING definitions.
Details fire hazard risks associated with improper venting and installation.
Lists all tools and parts required for dryer installation.
Provides essential dimensions and clearance information for dryer placement.
Warns about keeping flammable materials away from the dryer.
Outlines NEC requirements, 3-wire vs. 4-wire connections, and codes.
Step-by-step guide on how to attach and adjust the dryer's leveling legs.
Explains proper grounding procedures for cord-connected and permanently connected dryers.
Guides users to select between power supply cord or direct wire connections.
Instructions on how to access the dryer's terminal block for wiring.
Guides on connecting power supply cords, including strain relief and 4-wire/3-wire methods.
Guides on connecting direct wire installations, including strain relief and 4-wire/3-wire methods.
Procedure for adding an external ground for 3-wire connections.
Crucial warnings regarding fire hazards and proper dryer venting materials.
Guidance on choosing vent path, installation types, and recommended styles.
Charts and advice for determining vent lengths and combinations for optimal performance.
Steps for installing the exhaust hood and connecting the vent duct.
Instructions for connecting the water inlet hoses for steam models.
Connecting the vent to the dryer outlet and moving the dryer to its final location.
Instructions on how to check and adjust the dryer to ensure it is level.
A comprehensive list of checks to perform after installation.
Instructions for reversing the door swing on round-shaped doors.
Steps to remove and reverse the outer window assembly.
Procedures for reassembling the window assembly and reinstalling hinge/latch.
Instructions for reversing the door swing on square-shaped doors.
