To Next PageTo Next PageWhy my Whirlpool Dryer will not run?
Your Whirlpool dryer might not start due to several reasons. Ensure the door is fully closed. Touch and hold the START/PAUSE button with the pad of your finger. Check your household fuses or circuit breakers; electric dryers often have two. Also, electric dryers require a 240-volt power supply, and it’s recommended to use a time-delay fuse.
Why is my Whirlpool WED8700EC Dryer not heating?
If your Whirlpool dryer isn't heating, the drum may still be turning. Check your household fuses or circuit breakers; electric dryers often use two. Also, electric dryers require a 240-volt power supply. For gas dryers, ensure the gas supply line valve is open.
Why is my Whirlpool WED8700EC making a rattling or vibrating noise?
A rattling or vibrating noise in your Whirlpool dryer can be due to several reasons. Check for small objects caught between the edges of the dryer drum, and remember to clean out pockets before doing laundry. Ensure the dryer is properly leveled with all four feet firmly on the floor. Also, clothing balled up in the dryer can cause vibration; separate the items and restart the dryer.
Why does my Whirlpool WED8700EC Dryer will not turn off?
If your Whirlpool dryer doesn't turn off, it might be because the door was opened before the Wrinkle Shield™ option ended. Touch Power to turn off, or touch and hold Start/Pause to continue the Wrinkle Shield™ option.
Why is my Whirlpool WED8700EC load too hot?
If your Whirlpool dryer load is too hot, it might be because you removed the load before the cooldown portion of the cycle completed. Allow the dryer to finish the entire cycle. Also, using a Timed Dry cycle with a high temperature setting can cause overheating; select an Automatic Cycle with a lower heat setting instead.
Why is there lint on my clothes after using my Whirlpool WED8700EC?
If you notice lint on your clothes after drying in your Whirlpool dryer, the lint screen might be clogged. Clean the lint screen before each load to prevent this issue.
Why is my Whirlpool WED8700EC Dryer making a thumping noise?
A thumping noise from your Whirlpool dryer is normal if the dryer hasn't been used for a while. The sound should diminish after a few minutes of use.
Why is my Whirlpool WED8700EC humming or whining with Steam cycle selected?
The humming or whining noise during the Steam cycle on your Whirlpool dryer is the water pump running. This is normal, especially if the dryer has just been installed or hasn't been used for an extended period; the pump may be louder and run longer initially.
What to do if my Whirlpool WED8700EC is not connected to home Wi-Fi router?
If your Whirlpool dryer isn't connecting to your home Wi-Fi, first ensure it's not in standby mode by pressing the POWER button. If it has never been connected, refer to the “Connectivity Setup” section. If previously connected, press CONNECT to re-establish the connection. Check that your router is working with other devices. Weak signal strength may require moving the router closer or installing a Wi-Fi range extender.
What to do if my Whirlpool WED8700EC is connected to Wi-Fi but the app or Smart Grid doesn't work?
If your Whirlpool dryer is connected to Wi-Fi but the Whirlpool™ app or Smart Grid functions aren't working, verify that the Smart Grid features on the dryer are enabled. Touch CONNECT to turn the Smart Grid feature on. A blinking blue Smart Grid indicator may indicate connection issues. Also, ensure your user account is properly set up and the dryer is registered in the app, and verify your e-mail address, mobile number, and notification preferences are correct.
General| Color | silver, chrome shadow |
|---|---|
| Dryer Capactity | 8.8 cubic feet |
| Number of Cycles | 10 |
| Cycle Selections | mixed, casuals, towels, delicates, bulky, normal, sanitize, gentle, steam refresh, timed dry |
| Options | static reduce, end beep, damp bep wrinkle shield option, eco boost option, steam refresh |
| Temperature Settings | 5 |
| Temperature Selections | no heat, low, medium, high, hot |
| Temperature Control | yes |
| Control Type | electronic |
| Cycle Signal | yes |
| Interior Light | yes |
| Drying Rack | no |
| Moisture Sensor Option | yes |
| Steam | yes |
| Smart Home | yes |
| Voltage | 240 volts |
| Current | 30 amperes |
Weight and Dimensions| Depth | 32.25 inches |
|---|---|
| Height | 42.25 inches |
| Width | 29 inches |
| Net Weight | 142 pounds |
Details on features for remote monitoring, management, and maintenance of the dryer.
Guidance on selecting cycles for better fabric care and energy savings.
How to use Power, Start/Pause, Connect, Download & Go, and Remote Start buttons.
Adjusting temperature and dryness levels for drying cycles.
Instructions on preparing and using the home wireless router for connection.
Procedures for setting up the dryer to connect to the network.
Instructions on downloading and installing the Whirlpool™ mobile app.
Selecting drying methods like Normal, Sanitize, Gentle, Steam Refresh, Timed Dry.
Categorization of items to be dried, such as Mixed, Casuals, Towels, Delicates.
Instructions on cleaning the lint screen before each load for efficiency.
Detailed steps for cleaning the lint screen regularly.
Troubleshooting steps when the dryer is not connected to Wi-Fi.
Steps to resolve the dryer not starting, running, or producing heat.
Understanding and troubleshooting error codes and indicator lights.
